Re: [PATCH V2 6/6] arm64: tegra: Add GTE nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2/16/23 6:18 AM, Krzysztof Kozlowski wrote:
> On 14/02/2023 12:55, Dipen Patel wrote:
>> Add GTE nodes for the tegra234. Also modify AON GTE nodes for the
>> tegra194 to remove nvidia,slice property and add nvidia,gpio-controller
>> propertyto specify AON GPIO controller node so that GTE driver can
>> do namespace conversion between GPIO lines provided by the gpiolib
>> framework and hardware timestamping engine subsystem.
>>
>> Signed-off-by: Dipen Patel <dipenp@xxxxxxxxxx>
>> ---
>>  arch/arm64/boot/dts/nvidia/tegra194.dtsi |  3 +--
>>  arch/arm64/boot/dts/nvidia/tegra234.dtsi | 19 +++++++++++++++++++
>>  2 files changed, 20 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
>> index 4afcbd60e144..4c92850b1ec4 100644
>> --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
>> +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
>> @@ -1363,7 +1363,6 @@
>>  			reg = <0x3aa0000 0x10000>;
>>  			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>>  			nvidia,int-threshold = <1>;
>> -			nvidia,slices = <11>;
>>  			#timestamp-cells = <1>;
>>  			status = "okay";
>>  		};
>> @@ -1586,7 +1585,7 @@
>>  			reg = <0xc1e0000 0x10000>;
>>  			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>>  			nvidia,int-threshold = <1>;
>> -			nvidia,slices = <3>;
>> +			nvidia,gpio-controller = <&gpio_aon>;
>>  			#timestamp-cells = <1>;
>>  			status = "okay";
>>  		};
>> diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
>> index eaf05ee9acd1..4a87490c5fd4 100644
>> --- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi
>> +++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
>> @@ -1086,6 +1086,15 @@
>>  			clock-names = "fuse";
>>  		};
>>  
>> +		hte_lic: hardware-timestamp@3aa0000 {
>> +			compatible = "nvidia,tegra234-gte-lic";
>> +			reg = <0x3aa0000 0x10000>;
>> +			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>> +			nvidia,int-threshold = <1>;
>> +			#timestamp-cells = <1>;
>> +			status = "okay";
> 
> Why do you need status? It's okay by default.
what's harm of having to explicitly mentioned? I can see status = okay in this dtsi file
for other nodes as well and was just following that.
> 
>> +		};
>> +
>>  		hsp_top0: hsp@3c00000 {
>>  			compatible = "nvidia,tegra234-hsp", "nvidia,tegra194-hsp";
>>  			reg = <0x03c00000 0xa0000>;
>> @@ -1603,6 +1612,16 @@
>>  			#mbox-cells = <2>;
>>  		};
>>  
>> +		hte_aon: hardware-timestamp@c1e0000 {
>> +			compatible = "nvidia,tegra234-gte-aon";
>> +			reg = <0xc1e0000 0x10000>;
>> +			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>> +			nvidia,int-threshold = <1>;
>> +			nvidia,gpio-controller = <&gpio_aon>;
>> +			#timestamp-cells = <1>;
>> +			status = "okay";
> 
> 
> Also here
> 
> Best regards,
> Krzysztof
> 




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux