Re: [PATCH V3 1/2] usb: gadget: u_ether: Convert prints to device prints

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Feb 14, 2023 at 11:55:56AM +0000, Jon Hunter wrote:
> 
> On 13/02/2023 13:49, Andrzej Pietrasiewicz wrote:
> > Hi Jon,
> > 
> > W dniu 9.02.2023 o 13:53, Jon Hunter pisze:
> > > The USB ethernet gadget driver implements its own print macros which
> > > call printk. Device drivers should use the device prints that print the
> > > device name. Fortunately, the same macro names are defined in the header
> > > file 'linux/usb/composite.h' and these use the device prints. Therefore,
> > > remove the local definitions in the USB ethernet gadget driver and use
> > > those in 'linux/usb/composite.h'. The only difference is that now the
> > > device name is printed instead of the ethernet interface name.
> > > 
> > > Tested using ethernet gadget on Jetson AGX Orin.
> > > 
> > > Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx>
> > > Tested-by: Jon Hunter <jonathanh@xxxxxxxxxx>
> > > ---
> > > V3: Added this patch and dropped the patch in V2 that improved some of
> > >      the prints.
> > > 
> > >   drivers/usb/gadget/function/u_ether.c | 36 +--------------------------
> > >   1 file changed, 1 insertion(+), 35 deletions(-)
> > > 
> > > diff --git a/drivers/usb/gadget/function/u_ether.c
> > > b/drivers/usb/gadget/function/u_ether.c
> > > index 8f12f3f8f6ee..740331882e8d 100644
> > > --- a/drivers/usb/gadget/function/u_ether.c
> > > +++ b/drivers/usb/gadget/function/u_ether.c
> > > @@ -17,6 +17,7 @@
> > >   #include <linux/etherdevice.h>
> > >   #include <linux/ethtool.h>
> > >   #include <linux/if_vlan.h>
> > > +#include <linux/usb/composite.h>
> > >   #include "u_ether.h"
> > > @@ -103,41 +104,6 @@ static inline int qlen(struct usb_gadget
> > > *gadget, unsigned qmult)
> > > /*-------------------------------------------------------------------------*/
> > > -/* REVISIT there must be a better way than having two sets
> > > - * of debug calls ...
> > > - */
> > > -
> > > -#undef DBG
> > > -#undef VDBG
> > > -#undef ERROR
> > > -#undef INFO
> > > -
> > > -#define xprintk(d, level, fmt, args...) \
> > > -    printk(level "%s: " fmt , (d)->net->name , ## args)
> > > -
> > > -#ifdef DEBUG
> > > -#undef DEBUG
> > > -#define DBG(dev, fmt, args...) \
> > > -    xprintk(dev , KERN_DEBUG , fmt , ## args)
> > > -#else
> > > -#define DBG(dev, fmt, args...) \
> > > -    do { } while (0)
> > > -#endif /* DEBUG */
> > 
> > Actually there are more (at least hypothetical) changes than the declared
> > change of printed device name.
> > 
> > If DEBUG is not set there can be _more_ messages printed
> > when your patch is applied as-is (i.e. all DBG() invocations will
> > expand into some dev_dbg(), whereas before the patch is applied
> > they compile into nothing).
> 
> So dev_dbg() messages will only be printed if DEBUG is defined or if dynamic
> debug is enabled and the prints are enabled.
> 
> Greg, let me know what your thoughts on this version are?

Looks good to me, let me queue it up now.

thanks,

greg k-h



[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux