>
> On Wed, Feb 08, 2023 at 05:43:35PM +0530, Manikanta Maddireddy wrote:
> >
> > On 2/8/2023 5:07 PM, Thierry Reding wrote:
> > > On Wed, Feb 08, 2023 at 04:46:44PM +0530, Manikanta Maddireddy
> wrote:
> > > > Add PCIe port node under the PCIe controller-1 device tree node to
> > > > support PCIe WAKE# interrupt for WiFi.
> > > >
> > > > Signed-off-by: Manikanta Maddireddy <mmaddireddy@xxxxxxxxxx>
> > > > ---
> > > >
> > > > Changes in v14:
> > > > New patch in the series to support PCIe WAKE# in NVIDIA Jetson AGX
> Orin.
> > > >
> > > > .../dts/nvidia/tegra234-p3737-0000+p3701-0000.dts | 11
> +++++++++++
> > > > 1 file changed, 11 insertions(+)
> > > >
> > > > diff --git
> > > > a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
> > > > b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
> > > > index 8a9747855d6b..9c89be263141 100644
> > > > ---
> > > > a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
> > > > +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-
> 0000.dt
> > > > +++ s
> > > > @@ -2147,6 +2147,17 @@ pcie@14100000 {
> > > > phys = <&p2u_hsio_3>;
> > > > phy-names = "p2u-0";
> > > > +
> > > > + pci@0,0 {
> > > > + reg = <0x0000 0 0 0 0>;
> > > > + #address-cells = <3>;
> > > > + #size-cells = <2>;
> > > > + ranges;
> > > > +
> > > > + interrupt-parent = <&gpio>;
> > > > + interrupts = <TEGRA234_MAIN_GPIO(L, 2)
> IRQ_TYPE_LEVEL_LOW>;
> > > > + interrupt-names = "wakeup";
> > > > + };
> > > Don't we need to wire this to the PMC interrupt controller and the
> > > wake event corresponding to the L2 GPIO? Otherwise none of the wake
> > > logic in PMC will get invoked.
> > >
> > > Thierry
> > PCIe wake is gpio based not pmc, only wake support is provided by PMC
> > controller.
> > I verified this patch and able to wake up Tegra from suspend.
> > Petlozu, correct me if my understanding is wrong.
>
> The way that this usually works is that you need to use something like
> this:
>
> interrupt-parent = <&pmc>;
> interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
> interrupt-names = "wakeup";
>
> This will then cause the PMC's interrupt chip callbacks to setup all the wake-
> related interrupts and use the internal wake event tables to forward the
> GPIO/IRQ corresponding to the PMC wake event to the GPIO controller or
> GIC, respectively.
>
> If you use &gpio as the interrupt parent, none of the PMC logic will be
> invoked, so unless this is somehow set up correctly by default, the PMC
> wouldn't be able to wake up the system.
>
> Thierry
Thierry,
Since PMC's IRQ domain is made as parent of GPIO controller's IRQ domain,
I think, for GPIO based wakes setting &gpio as the interrupt parent can still
invoke PMC logic to program the required registers to enable such wakes.
Related commit in this regard:
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/drivers/gpio/gpio-tegra186.c?id=2a36550567307b881ce570a81189682ae1c9d08d
Thanks.
