On Wed, Feb 08, 2023 at 04:46:43PM +0530, Manikanta Maddireddy wrote:
> From: Jeffy Chen <jeffy.chen@xxxxxxxxxxxxxx>
>
> Add of_pci_setup_wake_irq() to parse the PCIe WAKE# interrupt from the
> device tree and set the wake irq. Add of_pci_teardown_wake_irq() to clear
> the wake irq.
>
> Call of_pci_setup_wake_irq() in pci_device_probe() to setup PCIe WAKE#
> interrupt during PCIe Endpoint enumeration.
>
> Enable or disable PCIe WAKE# interrupt in platform_pci_set_wakeup().
>
> Signed-off-by: Jeffy Chen <jeffy.chen@xxxxxxxxxxxxxx>
> Signed-off-by: Manikanta Maddireddy <mmaddireddy@xxxxxxxxxx>
> ---
>
> Changes in v14:
> pci_platform_pm_ops structure is removed in latest kernel, so dropped
> pci-of driver. Instead, enable wake in platform_pci_set_wakeup().
>
> Changes in v13:
> Fix compiler error reported by kbuild test robot <fengguang.wu@xxxxxxxxx>
>
> Changes in v12:
> Enable the wake irq in noirq stage to avoid possible irq storm.
>
> Changes in v11:
> Only support 1-per-device PCIe WAKE# pin as suggested.
>
> Changes in v10:
> Use device_set_wakeup_capable() instead of device_set_wakeup_enable(),
> since dedicated wakeirq will be lost in device_set_wakeup_enable(false).
>
> Changes in v9:
> Fix check error in .cleanup().
> Move dedicated wakeirq setup to setup() callback and use
> device_set_wakeup_enable() to enable/disable.
>
> Changes in v8:
> Add pci-of.c and use platform_pm_ops to handle the PCIe WAKE# signal.
>
> Changes in v7:
> Move PCIE_WAKE handling into pci core.
>
> Changes in v6:
> Fix device_init_wake error handling, and add some comments.
>
> Changes in v5:
> Rebase.
>
> Changes in v3:
> Fix error handling.
>
> Changes in v2:
> Use dev_pm_set_dedicated_wake_irq.
>
> drivers/pci/of.c | 49 ++++++++++++++++++++++++++++++++++++++++
> drivers/pci/pci-driver.c | 10 ++++++++
> drivers/pci/pci.c | 7 ++++++
> drivers/pci/pci.h | 8 +++++++
> 4 files changed, 74 insertions(+)
>
> diff --git a/drivers/pci/of.c b/drivers/pci/of.c
> index ff897c40ed71..1c348e63f175 100644
> --- a/drivers/pci/of.c
> +++ b/drivers/pci/of.c
> @@ -13,6 +13,7 @@
> #include <linux/of_irq.h>
> #include <linux/of_address.h>
> #include <linux/of_pci.h>
> +#include <linux/pm_wakeirq.h>
> #include "pci.h"
>
> #ifdef CONFIG_PCI
> @@ -705,3 +706,51 @@ u32 of_pci_get_slot_power_limit(struct device_node *node,
> return slot_power_limit_mw;
> }
> EXPORT_SYMBOL_GPL(of_pci_get_slot_power_limit);
> +
> +int of_pci_setup_wake_irq(struct pci_dev *pdev)
> +{
> + struct pci_dev *ppdev;
Perhaps "parent" since that's what it is referring to? ppdev is a bit
vague.
> + struct device_node *dn;
> + int ret, irq;
> +
> + /* Get the pci_dev of our parent. Hopefully it's a port. */
> + ppdev = pdev->bus->self;
> + /* Nope, it's a host bridge. */
> + if (!ppdev)
> + return 0;
> +
> + dn = pci_device_to_OF_node(ppdev);
> + if (!dn)
> + return 0;
> +
> + irq = of_irq_get_byname(dn, "wakeup");
> + if (irq == -EPROBE_DEFER) {
> + return irq;
> + } else if (irq < 0) {
> + /* Ignore other errors, since a missing wakeup is non-fatal. */
> + dev_info(&pdev->dev, "cannot get wakeup interrupt: %d\n", irq);
dev_dbg() maybe? As it is this would add an annoying info message for
basically every PCI controller on every DT-based board out there.
Thierry
Attachment:
signature.asc
Description: PGP signature
