Re: [PATCH V9 1/6] dt-bindings: usb: Add Cypress cypd4226 Type-C controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 27/01/2023 16:10, Jon Hunter wrote:
> From: Wayne Chang <waynec@xxxxxxxxxx>
> 
> Add the device-tree binding documentation for Cypress cypd4226 dual
> Type-C controller.
> 
> Signed-off-by: Wayne Chang <waynec@xxxxxxxxxx>
> Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx>
> ---
> V9: added 'unevaluatedProperties' and 'additionalProperties'
> V8: removed 'additionalProperties'
> V7: updated example to use 'typec' for the node name
> V6: no changes
> V5: updated subject and updated binding to use 'firmware-name'.
> V4: no changes
> V3: fix additionalProperties warning on new schema
> V2: based on the review comments. Fix some addressed issues on

Thanks, this is looking good, although few more questions popped up
while comparing it with other bindings.

(...)

> +  firmware-name:
> +    enum:
> +      - nvidia,gpu
> +      - nvidia,jetson-agx-xavier
> +    description: |
> +      The name of the CCGx firmware built for product series.
> +      should be set one of following:
> +      - "nvidia,gpu" for the NVIDIA RTX product series
> +      - "nvidia,jetson-agx-xavier" for the NVIDIA Jetson product series
> +
> +patternProperties:
> +  '^connector@[0-1]+$':

How many connectors do you expect/support? 1111 is valid? I guess you
wanted only [01]?

> +    $ref: /schemas/connector/usb-connector.yaml#
> +    unevaluatedProperties: false
> +    properties:
> +      reg:
> +        maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts

I would assume that at least one connector is required (oneOf: required:).

> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/tegra194-gpio.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      #interrupt-cells = <2>;
> +
> +      typec@8 {
> +        compatible = "cypress,cypd4226";
> +        reg = <0x08>;
> +        interrupt-parent = <&gpio_aon>;
> +        interrupts = <TEGRA194_AON_GPIO(BB, 2) IRQ_TYPE_LEVEL_LOW>;
> +        firmware-name = "nvidia,jetson-agx-xavier";
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        connector@0 {
> +          compatible = "usb-c-connector";
> +          reg = <0>;
> +          label = "USB-C";
> +          data-role = "dual";
> +          ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            port@0 {
> +              reg = <0>;
> +              endpoint {
> +                remote-endpoint = <&usb_role_switch0>;
> +              };
> +            };
> +          };
> +        };
> +      };
> +    };

Best regards,
Krzysztof




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux