On 20/01/2023 08:32, Krzysztof Kozlowski wrote: ...
+examples: + - | + #include <dt-bindings/gpio/tegra194-gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <2>;Drop, does not look like relevant or used here.
Without the above I get ... Documentation/devicetree/bindings/usb/cypress,cypd4226.example.dts:25.13-26: Warning (reg_format): /example-0/i2c/typec-controller@8:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/usb/cypress,cypd4226.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/usb/cypress,cypd4226.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/usb/cypress,cypd4226.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/usb/cypress,cypd4226.example.dts:22.13-43.11: Warning (i2c_bus_bridge): /example-0/i2c: incorrect #address-cells for I2C bus Documentation/devicetree/bindings/usb/cypress,cypd4226.example.dts:22.13-43.11: Warning (i2c_bus_bridge): /example-0/i2c: incorrect #size-cells for I2C bus Documentation/devicetree/bindings/usb/cypress,cypd4226.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/usb/cypress,cypd4226.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'i2c_bus_bridge' Documentation/devicetree/bindings/usb/cypress,cypd4226.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/usb/cypress,cypd4226.example.dts:23.30-42.13: Warning (avoid_default_addr_size): /example-0/i2c/typec-controller@8: Relying on default #address-cells value Documentation/devicetree/bindings/usb/cypress,cypd4226.example.dts:23.30-42.13: Warning (avoid_default_addr_size): /example-0/i2c/typec-controller@8: Relying on default #size-cells value Documentation/devicetree/bindings/usb/cypress,cypd4226.example.dtb: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size' Documentation/devicetree/bindings/usb/cypress,cypd4226.example.dtb: typec-controller@8: interrupts: [[10], [8]] is too long
+ + ucsi-ccg@8 {Node names should be generic. https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
Thanks. I don't see anything there is would fit here, so would 'typec-controller' for the node name be OK? Cheers Jon -- nvpublic
