Add the USB Type-C controller that is present on the Jetson AGX Orin
board. The ports for the Type-C controller are not populated yet, but
will be added later once the USB host and device support for Jetson AGX
Orin is enabled.
This is based upon a patch from Wayne Chang <waynec@xxxxxxxxxx>.
Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx>
---
V4: This is effectively a new patch that has been added, but based upon
a patch from Wayne Change that added USB host, device and type-C
support in a single patch.
.../dts/nvidia/tegra234-p3737-0000+p3701-0000.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
index 32c58aa00035..059a23ce810b 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -2115,6 +2115,20 @@ usb@3610000 {
phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3",
"usb3-0", "usb3-1", "usb3-2";
};
+
+ i2c@c240000 {
+ status = "okay";
+ ucsi_ccg: ucsi_ccg@8 {
+ compatible = "cypress,cypd4226";
+ cypress,firmware-build = "gn";
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA234_MAIN_GPIO(Y, 4) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x08>;
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
};
chosen {
--
2.25.1
