On 14/11/2022 12:40, Wayne Chang wrote:
Add device-tree binding documentation for the XUSB host controller present on Tegra234 SoC. This controller supports the USB 3.1 specification. Signed-off-by: Wayne Chang <waynec@xxxxxxxxxx> --- depends on the following change https://lore.kernel.org/all/20221003125141.123759-1-jonathanh@xxxxxxxxxx/ V2 -> V3:nothing has changed but added the dependency here V1 -> V2:new change for adding nvidia,tegra234-xusb.yaml .../bindings/usb/nvidia,tegra234-xusb.yaml | 159 ++++++++++++++++++ 1 file changed, 159 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra234-xusb.yaml diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra234-xusb.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra234-xusb.yaml new file mode 100644 index 000000000000..d78ee88ed208 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra234-xusb.yaml @@ -0,0 +1,159 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/nvidia,tegra234-xusb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra234 xHCI controller + +maintainers: + - Thierry Reding <thierry.reding@xxxxxxxxx> + - Jon Hunter <jonathanh@xxxxxxxxxx> + +description: The Tegra xHCI controller supports both USB2 and USB3 interfaces + exposed by the Tegra XUSB pad controller. + +properties: + compatible: + const: nvidia,tegra234-xusb + + reg: + items: + - description: base and length of the xHCI host registers + - description: base and length of the XUSB FPCI registers + - description: base and length of the XUSB bar2 registers + + reg-names: + items: + - const: hcd + - const: fpci + - const: bar2 + + interrupts: + items: + - description: xHCI host interrupt + - description: mailbox interrupt + + clocks: + items: + - description: XUSB host clock + - description: XUSB Falcon source clock + - description: XUSB SuperSpeed clock + - description: XUSB SuperSpeed source clock + - description: XUSB HighSpeed clock source + - description: XUSB FullSpeed clock source + - description: USB PLL + - description: reference clock + - description: I/O PLL + + clock-names: + items: + - const: xusb_host + - const: xusb_falcon_src + - const: xusb_ss + - const: xusb_ss_src + - const: xusb_hs_src + - const: xusb_fs_src + - const: pll_u_480m + - const: clk_m + - const: pll_e + + interconnects: + items: + - description: read client + - description: write client + + interconnect-names: + items: + - const: dma-mem # read + - const: write + + iommus: + maxItems: 1 + + nvidia,xusb-padctl: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the XUSB pad controller that is used to configure + the USB pads used by the XHCI controller + + phys: + minItems: 1 + maxItems: 8 + + phy-names: + minItems: 1 + maxItems: 8 + items: + enum: + - usb2-0 + - usb2-1 + - usb2-2 + - usb2-3 + - usb3-0 + - usb3-1 + - usb3-2 + - usb3-3 + + power-domains: + items: + - description: XUSBC power domain + - description: XUSBA power domain + + power-domain-names: + items: + - const: xusb_host + - const: xusb_ss + + dma-coherent: + type: boolean + +allOf: + - $ref: usb-xhci.yaml + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/tegra234-gpio.h> + #include <dt-bindings/clock/tegra234-clock.h> + #include <dt-bindings/memory/tegra234-mc.h> + #include <dt-bindings/power/tegra234-powergate.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + usb@3610000 { + compatible = "nvidia,tegra234-xusb"; + reg = <0x03610000 0x40000>, + <0x03600000 0x10000>, + <0x03650000 0x10000>; + reg-names = "hcd", "fpci", "bar2"; + + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&bpmp TEGRA234_CLK_XUSB_CORE_HOST>, + <&bpmp TEGRA234_CLK_XUSB_FALCON>, + <&bpmp TEGRA234_CLK_XUSB_CORE_SS>, + <&bpmp TEGRA234_CLK_XUSB_SS>, + <&bpmp TEGRA234_CLK_CLK_M>, + <&bpmp TEGRA234_CLK_XUSB_FS>, + <&bpmp TEGRA234_CLK_UTMIP_PLL>, + <&bpmp TEGRA234_CLK_CLK_M>, + <&bpmp TEGRA234_CLK_PLLE>; + clock-names = "xusb_host", "xusb_falcon_src", + "xusb_ss", "xusb_ss_src", "xusb_hs_src", + "xusb_fs_src", "pll_u_480m", "clk_m", + "pll_e"; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_XUSB_HOSTR &emc>, + <&mc TEGRA234_MEMORY_CLIENT_XUSB_HOSTW &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu_niso1 TEGRA234_SID_XUSB_HOST>; + + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_XUSBC>, + <&bpmp TEGRA234_POWER_DOMAIN_XUSBA>; + power-domain-names = "xusb_host", "xusb_ss"; + + nvidia,xusb-padctl = <&xusb_padctl>; + + phys = <&pad_lanes_usb2_0>; + phy-names = "usb2-0"; + + };
Reviewed-by: Jon Hunter <jonathanh@xxxxxxxxxx> Thanks Jon -- nvpublic
