Thanks for the review and yes please go ahead and apply.
Thanks,
Vidya Sagar
On 10/28/2022 5:12 PM, Vinod Koul wrote:
External email: Use caution opening links or attachments
On 14-10-22, 00:08, Vidya Sagar wrote:
Set ENABLE_L2_EXIT_RATE_CHANGE register bit to request UPHY PLL rate change
to Gen1 during initialization. This helps in the below surprise link down
cases,
- Surprise link down happens at Gen3/Gen4 link speed.
- Surprise link down happens and external REFCLK is cut off, which causes
UPHY PLL rate to deviate to an invalid rate.
This looks okay to me and I can go ahead and apply, PCI patches can come
thru PCI tree and whenever ready use .calibrate() ?
Signed-off-by: Vidya Sagar <vidyas@xxxxxxxxxx>
---
V3:
* Removed "Reported-by: kernel test robot <lkp@xxxxxxxxx>" based on Bjorn's review comment
* Reworded the commit message
V2:
* Addressed review comment from test bot and Vinod
drivers/phy/tegra/phy-tegra194-p2u.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/phy/tegra/phy-tegra194-p2u.c b/drivers/phy/tegra/phy-tegra194-p2u.c
index 1415ca71de38..633e6b747275 100644
--- a/drivers/phy/tegra/phy-tegra194-p2u.c
+++ b/drivers/phy/tegra/phy-tegra194-p2u.c
@@ -15,6 +15,7 @@
#include <linux/phy/phy.h>
#define P2U_CONTROL_CMN 0x74
+#define P2U_CONTROL_CMN_ENABLE_L2_EXIT_RATE_CHANGE BIT(13)
#define P2U_CONTROL_CMN_SKP_SIZE_PROTECTION_EN BIT(20)
#define P2U_PERIODIC_EQ_CTRL_GEN3 0xc0
@@ -85,8 +86,21 @@ static int tegra_p2u_power_on(struct phy *x)
return 0;
}
+static int tegra_p2u_calibrate(struct phy *x)
+{
+ struct tegra_p2u *phy = phy_get_drvdata(x);
+ u32 val;
+
+ val = p2u_readl(phy, P2U_CONTROL_CMN);
+ val |= P2U_CONTROL_CMN_ENABLE_L2_EXIT_RATE_CHANGE;
+ p2u_writel(phy, val, P2U_CONTROL_CMN);
+
+ return 0;
+}
+
static const struct phy_ops ops = {
.power_on = tegra_p2u_power_on,
+ .calibrate = tegra_p2u_calibrate,
.owner = THIS_MODULE,
};
--
2.17.1
--
~Vinod
