On Thu, Oct 27, 2022 at 10:55:34AM +0100, Ben Dooks wrote:
> On 26/10/2022 12:39, Jon Hunter wrote:
> > Hi Lorenzo,
> >
> > On 18/10/2022 17:43, Bjorn Helgaas wrote:
> > > On Tue, Oct 18, 2022 at 07:21:54AM +0100, Jon Hunter wrote:
> > > > Hi Bjorn,
> > > >
> > > > On 13/09/2022 11:12, Vidya Sagar wrote:
> > > > > Some of the platforms (like Tegra194 and Tegra234) have open slots and
> > > > > not having an endpoint connected to the slot is not an error.
> > > > > So, changing the macro from dev_err to dev_info to log the event.
> > > > >
> > > > > Signed-off-by: Vidya Sagar <vidyas@xxxxxxxxxx>
> > > > > ---
> > > > > drivers/pci/controller/dwc/pcie-designware.c | 2 +-
> > > > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > > > >
> > > > > diff --git a/drivers/pci/controller/dwc/pcie-designware.c
> > > > > b/drivers/pci/controller/dwc/pcie-designware.c
> > > > > index 650a7f22f9d0..25154555aa7a 100644
> > > > > --- a/drivers/pci/controller/dwc/pcie-designware.c
> > > > > +++ b/drivers/pci/controller/dwc/pcie-designware.c
> > > > > @@ -456,7 +456,7 @@ int dw_pcie_wait_for_link(struct dw_pcie *pci)
> > > > > }
> > > > > if (retries >= LINK_WAIT_MAX_RETRIES) {
> > > > > - dev_err(pci->dev, "Phy link never came up\n");
> > > > > + dev_info(pci->dev, "Phy link never came up\n");
> > > > > return -ETIMEDOUT;
> > > > > }
> > > >
> > > >
> > > > Are you OK to take this change?
> > >
> > > When this came up, Lorenzo was in the middle of a big move and I was
> > > covering for him while he was unavailable. But he's back, and I'm
> > > sure he will resolve this soon.
> > >
> > > Personally I'm OK either way.
> > >
> > > Bjorn
> >
> >
> > Can we come to a conclusion on this?
> >
> > We have tests that fail when errors/warning messages are reported. We
> > can choose to ignore these errors, but given that this is not an error
> > in this case, we were thinking it is better to make it informational.
>
> Is there any hardware presence detect available to just avoid even
> trying to bring a link up on an disconnected port?
>
PRSNT pin is not available on all form factors sadly.
Thanks,
Mani
>
> --
> Ben Dooks http://www.codethink.co.uk/
> Senior Engineer Codethink - Providing Genius
>
> https://www.codethink.co.uk/privacy.html
>
--
மணிவண்ணன் சதாசிவம்
