[PATCH v7 26/29] thermal/drivers/acerhdf: Use generic thermal_zone_get_trip() function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

Convert ops content logic into generic trip points and register them with the
thermal zone.

Signed-off-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
Acked-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Acked-by: Peter Kästle <peter@xxxxxxxx>
---
 drivers/platform/x86/acerhdf.c | 73 ++++++++++++----------------------
 1 file changed, 26 insertions(+), 47 deletions(-)

diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
index 3463629f8764..a7407aa032ba 100644
--- a/drivers/platform/x86/acerhdf.c
+++ b/drivers/platform/x86/acerhdf.c
@@ -46,6 +46,8 @@
  * measured by the on-die thermal monitor are within 0 <= Tj <= 90. So,
  * assume 89°C is critical temperature.
  */
+#define ACERHDF_DEFAULT_TEMP_FANON 60000
+#define ACERHDF_DEFAULT_TEMP_FANOFF 53000
 #define ACERHDF_TEMP_CRIT 89000
 #define ACERHDF_FAN_OFF 0
 #define ACERHDF_FAN_AUTO 1
@@ -70,8 +72,8 @@ static int kernelmode;
 #endif
 
 static unsigned int interval = 10;
-static unsigned int fanon = 60000;
-static unsigned int fanoff = 53000;
+static unsigned int fanon = ACERHDF_DEFAULT_TEMP_FANON;
+static unsigned int fanoff = ACERHDF_DEFAULT_TEMP_FANOFF;
 static unsigned int verbose;
 static unsigned int list_supported;
 static unsigned int fanstate = ACERHDF_FAN_AUTO;
@@ -137,6 +139,15 @@ struct ctrl_settings {
 	int mcmd_enable;
 };
 
+static struct thermal_trip trips[] = {
+	[0] = { .temperature = ACERHDF_DEFAULT_TEMP_FANON,
+		.hysteresis = ACERHDF_DEFAULT_TEMP_FANON - ACERHDF_DEFAULT_TEMP_FANOFF,
+		.type = THERMAL_TRIP_ACTIVE },
+
+	[1] = { .temperature = ACERHDF_TEMP_CRIT,
+		.type = THERMAL_TRIP_CRITICAL }
+};
+
 static struct ctrl_settings ctrl_cfg __read_mostly;
 
 /* Register addresses and values for different BIOS versions */
@@ -326,6 +337,15 @@ static void acerhdf_check_param(struct thermal_zone_device *thermal)
 		fanon = ACERHDF_MAX_FANON;
 	}
 
+	if (fanon < fanoff) {
+		pr_err("fanoff temperature (%d) is above fanon temperature (%d), clamping to %d\n",
+		       fanoff, fanon, fanon);
+		fanoff = fanon;
+	};
+
+	trips[0].temperature = fanon;
+	trips[0].hysteresis  = fanon - fanoff;
+
 	if (kernelmode && prev_interval != interval) {
 		if (interval > ACERHDF_MAX_INTERVAL) {
 			pr_err("interval too high, set to %d\n",
@@ -424,43 +444,6 @@ static int acerhdf_change_mode(struct thermal_zone_device *thermal,
 	return 0;
 }
 
-static int acerhdf_get_trip_type(struct thermal_zone_device *thermal, int trip,
-				 enum thermal_trip_type *type)
-{
-	if (trip == 0)
-		*type = THERMAL_TRIP_ACTIVE;
-	else if (trip == 1)
-		*type = THERMAL_TRIP_CRITICAL;
-	else
-		return -EINVAL;
-
-	return 0;
-}
-
-static int acerhdf_get_trip_hyst(struct thermal_zone_device *thermal, int trip,
-				 int *temp)
-{
-	if (trip != 0)
-		return -EINVAL;
-
-	*temp = fanon - fanoff;
-
-	return 0;
-}
-
-static int acerhdf_get_trip_temp(struct thermal_zone_device *thermal, int trip,
-				 int *temp)
-{
-	if (trip == 0)
-		*temp = fanon;
-	else if (trip == 1)
-		*temp = ACERHDF_TEMP_CRIT;
-	else
-		return -EINVAL;
-
-	return 0;
-}
-
 static int acerhdf_get_crit_temp(struct thermal_zone_device *thermal,
 				 int *temperature)
 {
@@ -474,13 +457,9 @@ static struct thermal_zone_device_ops acerhdf_dev_ops = {
 	.unbind = acerhdf_unbind,
 	.get_temp = acerhdf_get_ec_temp,
 	.change_mode = acerhdf_change_mode,
-	.get_trip_type = acerhdf_get_trip_type,
-	.get_trip_hyst = acerhdf_get_trip_hyst,
-	.get_trip_temp = acerhdf_get_trip_temp,
 	.get_crit_temp = acerhdf_get_crit_temp,
 };
 
-
 /*
  * cooling device callback functions
  * get maximal fan cooling state
@@ -710,10 +689,10 @@ static int __init acerhdf_register_thermal(void)
 	if (IS_ERR(cl_dev))
 		return -EINVAL;
 
-	thz_dev = thermal_zone_device_register("acerhdf", 2, 0, NULL,
-					      &acerhdf_dev_ops,
-					      &acerhdf_zone_params, 0,
-					      (kernelmode) ? interval*1000 : 0);
+	thz_dev = thermal_zone_device_register_with_trips("acerhdf", trips, ARRAY_SIZE(trips),
+							  0, NULL, &acerhdf_dev_ops,
+							  &acerhdf_zone_params, 0,
+							  (kernelmode) ? interval*1000 : 0);
 	if (IS_ERR(thz_dev))
 		return -EINVAL;
 
-- 
2.34.1




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux