Enable support for GPCDMA, which is used in I2C controllers
in Tegra 186 and above. The chips before that used APB DMA.
This change works under the presumption that all chips apart from
those supporting APB DMA is using GPCDMA.
Signed-off-by: Akhil R <akhilrajeev@xxxxxxxxxx>
---
drivers/i2c/busses/i2c-tegra.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 031c78ac42e6..954022c04cc4 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -443,11 +443,16 @@ static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev)
u32 *dma_buf;
int err;
- if (!i2c_dev->hw->has_apb_dma || i2c_dev->is_vi)
+ if (i2c_dev->is_vi)
return 0;
- if (!IS_ENABLED(CONFIG_TEGRA20_APB_DMA)) {
- dev_dbg(i2c_dev->dev, "DMA support not enabled\n");
+ if (!i2c_dev->hw->has_apb_dma) {
+ if (!IS_ENABLED(CONFIG_TEGRA20_APB_DMA)) {
+ dev_dbg(i2c_dev->dev, "APB DMA support not enabled\n");
+ return 0;
+ }
+ } else if (!IS_ENABLED(CONFIG_TEGRA186_GPC_DMA)) {
+ dev_dbg(i2c_dev->dev, "GPC DMA support not enabled\n");
return 0;
}
--
2.17.1
