Program USB2 UTMI pad PD controls during port connect/disconnect. Power down pad after disconnected to save power. Signed-off-by: Jim Lin <jilin@xxxxxxxxxx> --- drivers/usb/gadget/udc/tegra-xudc.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/gadget/udc/tegra-xudc.c b/drivers/usb/gadget/udc/tegra-xudc.c index 43f1b0d461c1..f03bed263922 100644 --- a/drivers/usb/gadget/udc/tegra-xudc.c +++ b/drivers/usb/gadget/udc/tegra-xudc.c @@ -703,6 +703,8 @@ static void tegra_xudc_device_mode_on(struct tegra_xudc *xudc) pm_runtime_get_sync(xudc->dev); + tegra_phy_xusb_utmi_pad_power_on(xudc->curr_utmi_phy); + err = phy_power_on(xudc->curr_utmi_phy); if (err < 0) dev_err(xudc->dev, "UTMI power on failed: %d\n", err); @@ -757,6 +759,8 @@ static void tegra_xudc_device_mode_off(struct tegra_xudc *xudc) /* Make sure interrupt handler has completed before powergating. */ synchronize_irq(xudc->irq); + tegra_phy_xusb_utmi_pad_power_down(xudc->curr_utmi_phy); + err = phy_power_off(xudc->curr_utmi_phy); if (err < 0) dev_err(xudc->dev, "UTMI PHY power off failed: %d\n", err); -- 2.17.1
