Re: [PATCH v2 1/4] dt-bindings: pinctrl: tegra: Convert to json-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jul 06, 2022 at 10:28:34PM +0200, Thierry Reding wrote:
> On Wed, Jul 06, 2022 at 09:38:22AM -0600, Rob Herring wrote:
> > On Mon, Jul 04, 2022 at 06:57:59PM +0200, Thierry Reding wrote:
> > > From: Thierry Reding <treding@xxxxxxxxxx>
> > > 
> > > Convert the NVIDIA Tegra pinmux controller bindings from the free-form
> > > text format to json-schema.
> > > 
> > > Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
> > > ---
> > > Changes in v2:
> > > - wrap lines at 80 characters instead of the standard 100 characters in Linux
> > > - use GPL-2.0-only instead of GPL-2.0+ license for DT bindings
> > > - reorder additionalProperties for better readability
> > > - move common definitions into a shared schema
> > > - remove consumer snippets from examples
> > > 
> > >  .../bindings/clock/nvidia,tegra124-dfll.yaml  |   2 +-
> > >  .../pinctrl/nvidia,tegra-pinmux-common.yaml   | 195 ++++++++++++++++++
> > >  .../pinctrl/nvidia,tegra114-pinmux.txt        | 131 ------------
> > >  .../pinctrl/nvidia,tegra114-pinmux.yaml       | 162 +++++++++++++++
> > >  .../pinctrl/nvidia,tegra124-pinmux.txt        | 153 --------------
> > >  .../pinctrl/nvidia,tegra124-pinmux.yaml       | 182 ++++++++++++++++
> > >  .../pinctrl/nvidia,tegra194-pinmux.txt        | 107 ----------
> > >  .../pinctrl/nvidia,tegra194-pinmux.yaml       |  88 ++++++++
> > >  .../pinctrl/nvidia,tegra20-pinmux.txt         | 143 -------------
> > >  .../pinctrl/nvidia,tegra20-pinmux.yaml        | 107 ++++++++++
> > >  .../pinctrl/nvidia,tegra210-pinmux.txt        | 166 ---------------
> > >  .../pinctrl/nvidia,tegra210-pinmux.yaml       | 146 +++++++++++++
> > >  .../pinctrl/nvidia,tegra30-pinmux.txt         | 144 -------------
> > >  .../pinctrl/nvidia,tegra30-pinmux.yaml        | 176 ++++++++++++++++
> > >  14 files changed, 1057 insertions(+), 845 deletions(-)
> > >  create mode 100644 Documentation/devicetree/bindings/pinctrl/nvidia,tegra-pinmux-common.yaml
> > >  delete mode 100644 Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.txt
> > >  create mode 100644 Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.yaml
> > >  delete mode 100644 Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt
> > >  create mode 100644 Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.yaml
> > >  delete mode 100644 Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.txt
> > >  create mode 100644 Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.yaml
> > >  delete mode 100644 Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt
> > >  create mode 100644 Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.yaml
> > >  delete mode 100644 Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt
> > >  create mode 100644 Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml
> > >  delete mode 100644 Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt
> > >  create mode 100644 Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.yaml
> > > 
> > > diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.yaml
> > > index 85234a48b590..96c54c215f77 100644
> > > --- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.yaml
> > > +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.yaml
> > > @@ -219,7 +219,7 @@ examples:
> > >  
> > >      /*
> > >       * pinmux nodes added for completeness. Binding doc can be found in:
> > > -     * Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt
> > > +     * Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml
> > >       */
> > >  
> > >      pinmux: pinmux@700008d4 {
> > > diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra-pinmux-common.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra-pinmux-common.yaml
> > > new file mode 100644
> > > index 000000000000..cb6b722b89af
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra-pinmux-common.yaml
> > > @@ -0,0 +1,195 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra-pinmux-common.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: NVIDIA Tegra Pinmux Controller
> > > +
> > > +maintainers:
> > > +  - Thierry Reding <thierry.reding@xxxxxxxxx>
> > > +  - Jonathan Hunter <jonathanh@xxxxxxxxxx>
> > > +
> > > +definitions:
> > 
> > This likely doesn't work because 'definitions' doesn't get fixups 
> > applied. '$defs' would, but in general I prefer avoiding this pattern 
> > except when really needed. I don't think it helps here. More below.
> > 
> > > +  pinconf-node:
> > > +    type: object
> > > +    description: |
> > > +      Please refer to pinctrl-bindings.txt in this directory for details of the
> > > +      common pinctrl bindings used by client devices, including the meaning of
> > > +      the phrase "pin configuration node".
> > > +
> > > +      Tegra's pin configuration nodes act as a container for an arbitrary number
> > > +      of subnodes. Each of these subnodes represents some desired configuration
> > > +      for a pin, a group, or a list of pins or groups. This configuration can
> > > +      include the mux function to select on those pin(s)/ group(s), and various
> > > +      pin configuration parameters, such as pull-up, tristate, drive strength,
> > > +      etc.
> > > +
> > > +      The name of each subnode is not important; all subnodes should be
> > > +      enumerated and processed purely based on their content.
> > > +
> > > +      Each subnode only affects those parameters that are explicitly listed. In
> > > +      other words, a subnode that lists a mux function but no pin configuration
> > > +      parameters implies no information about any pin configuration parameters.
> > > +
> > > +      Similarly, a pin subnode that describes a pullup parameter implies no
> > > +      information about e.g.  the mux function or tristate parameter. For this
> > > +      reason, even seemingly boolean values are actually tristates in this
> > > +      binding: unspecified, off, or on. Unspecified is represented as an absent
> > > +      property, and off/on are represented as integer values 0 and 1.
> > > +
> > > +      Note that many of these properties are only valid for certain specific pins
> > > +      or groups. See the Tegra TRM and various pinmux spreadsheets for complete
> > > +      details regarding which groups support which functionality. The Linux
> > > +      pinctrl driver may also be a useful reference, since it consolidates,
> > > +      disambiguates, and corrects data from all those sources.
> > > +
> > > +    patternProperties:
> > > +      "^pinmux(-[a-z0-9-_]+)?$":
> > 
> > Drop this and make all the below be at the top level (i.e. no indent).
> 
> The intention was to include the general structure as well as the
> description in each of the derived schemas. Some of the description
> could perhaps be dropped, but especially the bit about the tristate
> nature of some of these properties should stay in because it has caused
> confusion in the past.
> 
> Is there any other way that the description can be shared with your
> proposal (other than duplicating it in each binding document).

The 'description' above? You can move that to top-level too.

> > > +        type: object
> > > +        properties:
> > > +          nvidia,pins:
> > > +            $ref: /schemas/types.yaml#/definitions/string-array
> > > +            description: An array of strings. Each string contains the name of
> > > +              a pin or group.  Valid values for these names are listed below.
> > > +
> > > +          nvidia,function:
> > > +            $ref: /schemas/types.yaml#/definitions/string
> > > +            description: A string containing the name of the function to mux to
> > > +              the pin or group. Valid values for function names are listed
> > > +              below. See the Tegra TRM to determine which are valid for each
> > > +              pin or group.
> > > +
> > > +          nvidia,pull:
> > > +            description: Pull-down/up setting to apply to the pin.
> > > +            $ref: /schemas/types.yaml#/definitions/uint32
> > > +            oneOf:
> > > +              - description: none
> > > +                const: 0
> > > +              - description: down
> > > +                const: 1
> > > +              - description: up
> > > +                const: 2
> > > +
> > > +          nvidia,tristate:
> > > +            description: Tristate setting to apply to the pin.
> > > +            $ref: /schemas/types.yaml#/definitions/uint32
> > > +            oneOf:
> > > +              - description: drive
> > > +                const: 0
> > > +              - description: tristate
> > > +                const: 1
> > > +
> > > +          nvidia,schmitt:
> > > +            description: Enable Schmitt trigger on the input.
> > > +            $ref: /schemas/types.yaml#/definitions/uint32
> > > +            oneOf:
> > > +              - description: disable Schmitt trigger on the input
> > > +                const: 0
> > > +              - description: enable Schmitt trigger on the input
> > > +                const: 1
> > > +
> > > +          nvidia,pull-down-strength:
> > > +            description: Controls drive strength. 0 is weakest. The range of
> > > +              valid values depends on the pingroup. See "CAL_DRVDN" in the
> > > +              Tegra TRM.
> > > +            $ref: /schemas/types.yaml#/definitions/uint32
> > > +
> > > +          nvidia,pull-up-strength:
> > > +            description: Controls drive strength. 0 is weakest. The range of
> > > +              valid values depends on the pingroup. See "CAL_DRVUP" in the
> > > +              Tegra TRM.
> > > +            $ref: /schemas/types.yaml#/definitions/uint32
> > > +
> > > +  high-speed-mode:
> > 
> > Why do all these need to be definitions? They all have the same name and 
> > apply to the pinmux nodes. Just move them there with the right name.
> 
> All of the ones that are separate definitions are properties that appear
> for only a subset of the IP generations. So the idea was to create a
> definition and then derived bindings could cherry-pick these as
> necessary to complement the pinconf-node definition.
> 
> If I move these definitions to the top level, then they'll end up
> validating properly on devices where they shouldn't exist. Alternatively
> I'd have to duplicate all of these across various derivative bindings
> which gets us mostly back to the previous version of the patch (i.e. we
> don't save very much by only factoring out the truly common properties).

Not if you use 'additionalProperties: false'. Since it doesn't see into 
$ref's like unevaluatedProperties does, you have to list out which 
properties you are using in the derived binding:

$ref: list-of-common-props.yaml#

properties:
  high-speed-mode: true

additionalProperties: false

list-of-common-props.yaml could have a gazillion properties in 
it, but anything not listed locally will be disallowed.


> > > +    description: Enable high speed mode the pins.
> > > +    $ref: /schemas/types.yaml#/definitions/uint32
> > > +    oneOf:
> > > +      - description: normal speed mode
> > > +        const: 0
> > > +      - description: high speed mode
> > > +        const: 1
> > > +
> > > +  low-power-mode:
> > > +    description: Controls the drive power or current. Valid values are
> > > +      from 0 through 3, where 0 specifies the least power and 3 specifies
> > > +      the most power. See "Low Power Mode" or "LPMD1" and "LPMD0" in the
> > > +      Tegra TRM.
> > > +    $ref: /schemas/types.yaml#/definitions/uint32
> > > +    enum: [ 0, 1, 2, 3 ]
> > > +
> > > +  enable-input:
> > > +    description: Enable the pin's input path.
> > > +    $ref: /schemas/types.yaml#/definitions/uint32
> > > +    oneOf:
> > > +      - description: disable input (i.e. output only)
> > > +        const: 0
> > > +      - description: enable input
> > > +        const: 1
> > > +
> > > +  open-drain:
> > > +    description: Open-drain configuration for the pin.
> > > +    $ref: /schemas/types.yaml#/definitions/uint32
> > > +    oneOf:
> > > +      - description: disable open-drain
> > > +        const: 0
> > > +      - description: enable open-drain
> > > +        const: 1
> > > +
> > > +  lock:
> > > +    description: Lock the pin configuration against further changes until
> > > +      reset.
> > > +    $ref: /schemas/types.yaml#/definitions/uint32
> > > +    oneOf:
> > > +      - description: disable pin configuration lock
> > > +        const: 0
> > > +      - description: enable pin configuration lock
> > > +        const: 1
> > > +
> > > +  io-reset:
> > > +    description: reset the I/O path
> > > +    $ref: /schemas/types.yaml#/definitions/uint32
> > > +    enum: [ 0, 1 ]
> > > +
> > > +  rcv-sel:
> > > +    description: select VIL/VIH receivers
> > > +    $ref: /schemas/types.yaml#/definitions/uint32
> > > +    oneOf:
> > > +      - description: normal receivers
> > > +        const: 0
> > > +      - description: high-voltage receivers
> > > +        const: 1
> > > +
> > > +  drive-type:
> > > +    description: Drive type to configure for the pin.
> > > +    $ref: /schemas/types.yaml#/definitions/uint32
> > > +    enum: [ 0, 1, 2, 3 ]
> > > +
> > > +  io-hv:
> > > +    description: Select high-voltage receivers.
> > > +    $ref: /schemas/types.yaml#/definitions/uint32
> > > +    oneOf:
> > > +      - description: Use normal receivers.
> > > +        const: 0
> > > +      - description: Use high-voltage receivers.
> > > +        const: 1
> > > +
> > > +  slew-rate-rising:
> > > +    description: Controls rising signal slew rate. 0 is fastest. The
> > > +      range of valid values depends on the pingroup. See "DRVDN_SLWR" in
> > > +      the Tegra TRM.
> > > +    $ref: /schemas/types.yaml#/definitions/uint32
> > > +
> > > +  slew-rate-falling:
> > > +    description: Controls falling signal slew rate. 0 is fastest. The
> > > +      range of valid values depends on the pingroup. See "DRVUP_SLWF" in
> > > +      the Tegra TRM.
> > > +    $ref: /schemas/types.yaml#/definitions/uint32
> > > +
> > > +properties:
> > > +  reg:
> > > +    minItems: 1
> > > +    maxItems: 4
> > 
> > This doesn't get used anywhere.
> 
> I think I needed the properties keyword here because the tooling would
> otherwise consider this schema invalid. Perhaps if I restructure this
> that error will go away as well.

Probably so. All part of keeping people within the lines. :)

Rob



[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux