There is a corner case with Tegra30, where we want to skip clk
configuration that happens via dev_pm_opp_set_opp(), but still want the
OPP core to read the "opp-hz" property so we can find the right OPP via
freq finding helpers.
The OPP core provides support for the platforms to provide config_clks
helpers now, lets use that instead of devm_pm_opp_of_add_table_noclk()
to achieve the same result, as the OPP core won't parse the DT's
"opp-hz" property anymore if the clock isn't provided.
Tested-by: Dmitry Osipenko <dmitry.osipenko@xxxxxxxxxxxxx>
Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
---
drivers/devfreq/tegra30-devfreq.c | 22 +++++++++++++++++++---
1 file changed, 19 insertions(+), 3 deletions(-)
diff --git a/drivers/devfreq/tegra30-devfreq.c b/drivers/devfreq/tegra30-devfreq.c
index 65ecf17a36f4..0e0a4058f45c 100644
--- a/drivers/devfreq/tegra30-devfreq.c
+++ b/drivers/devfreq/tegra30-devfreq.c
@@ -821,6 +821,15 @@ static int devm_tegra_devfreq_init_hw(struct device *dev,
return err;
}
+static int tegra_devfreq_config_clks_nop(struct device *dev,
+ struct opp_table *opp_table,
+ struct dev_pm_opp *opp, void *data,
+ bool scaling_down)
+{
+ /* We want to skip clk configuration via dev_pm_opp_set_opp() */
+ return 0;
+}
+
static int tegra_devfreq_probe(struct platform_device *pdev)
{
u32 hw_version = BIT(tegra_sku_info.soc_speedo_id);
@@ -830,6 +839,13 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
unsigned int i;
long rate;
int err;
+ const char *clk_names[] = { "actmon", NULL };
+ struct dev_pm_opp_config config = {
+ .supported_hw = &hw_version,
+ .supported_hw_count = 1,
+ .clk_names = clk_names,
+ .config_clks = tegra_devfreq_config_clks_nop,
+ };
tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
if (!tegra)
@@ -874,13 +890,13 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
return err;
}
- err = devm_pm_opp_set_supported_hw(&pdev->dev, &hw_version, 1);
+ err = devm_pm_opp_set_config(&pdev->dev, &config);
if (err) {
- dev_err(&pdev->dev, "Failed to set supported HW: %d\n", err);
+ dev_err(&pdev->dev, "Failed to set OPP config: %d\n", err);
return err;
}
- err = devm_pm_opp_of_add_table_noclk(&pdev->dev, 0);
+ err = devm_pm_opp_of_add_table_indexed(&pdev->dev, 0);
if (err) {
dev_err(&pdev->dev, "Failed to add OPP table: %d\n", err);
return err;
--
2.31.1.272.g89b43f80a514
