Re: [PATCH 4.9 00/25] 4.9.316-rc1 review

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 24/05/2022 16:06, Greg Kroah-Hartman wrote:
On Tue, May 24, 2022 at 03:55:58PM +0100, Jon Hunter wrote:

On 24/05/2022 13:09, Greg Kroah-Hartman wrote:

...

I am seeing a boot regression on tegra124-jetson-tk1 and reverting the above
commit is fixing the problem. This also appears to impact linux-4.14.y,
4.19.y and 5.4.y.

Test results for stable-v4.9:
      8 builds:	8 pass, 0 fail
      18 boots:	16 pass, 2 fail
      18 tests:	18 pass, 0 fail

Linux version:	4.9.316-rc1-gbe4ec3e3faa1
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                  tegra210-p2371-2180, tegra30-cardhu-a04

Boot failures:	tegra124-jetson-tk1

Odd.  This is also in 5.10.y, right?  No issues there?  Are we missing
something?


Actually, the more I look at this, the more I see various intermittent
reports with this and it is also impacting the mainline.

The problem is that the commit in question is causing a ton of messages to
be printed a boot and this sometimes is causing the boot test to fail
because the boot is taking too long. The console shows ...

[ 1233.327547] CPU0: Spectre BHB: using loop workaround
[ 1233.327795] CPU1: Spectre BHB: using loop workaround
[ 1233.328270] CPU1: Spectre BHB: using loop workaround
[ 1233.328700] CPU1: Spectre BHB: using loop workaround
[ 1233.355477] CPU2: Spectre BHB: using loop workaround
** 7 printk messages dropped **
[ 1233.366271] CPU0: Spectre BHB: using loop workaround
[ 1233.366580] CPU0: Spectre BHB: using loop workaround
[ 1233.366815] CPU1: Spectre BHB: using loop workaround
[ 1233.405475] CPU1: Spectre BHB: using loop workaround
[ 1233.405874] CPU0: Spectre BHB: using loop workaround
[ 1233.406041] CPU1: Spectre BHB: using loop workaround
** 1 printk messages dropped **

There is a similar report of this [0] and I believe that we need a similar
fix for the above prints as well. I have reported this to Ard [1]. So I am
not sure that these Spectre BHB patches are quite ready for stable.

These patches are quite small, and just enable it for this known-broken
cpu type.

If there is an issue enabling it for this cpu type, then we can work on
that upstream, but there shouldn't be a reason to prevent this from
being merged now, especially given that it is supposed to be fixing a
known issue.

Yes understand. I have been doing some more testing and with v4.9, this is triggering a boot timeout 100% of the time. So with 20 boots, all 20 timeout. Note the timeout is 2 mins. With v4.14, I saw only 5 out of 20 timeouts and so it would seem that v4.9 is slower to boot in general. I think that the more recent kernels show intermittent timeouts.

We have some verbose logging enabled on this platform, which until now has not been a problem, but I will disable this and that should resolve this for now.

Cheers
Jon	

--
nvpublic



[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux