Re: [PATCH 4.9 00/25] 4.9.316-rc1 review

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 5/24/22 08:06, Greg Kroah-Hartman wrote:
On Tue, May 24, 2022 at 03:55:58PM +0100, Jon Hunter wrote:

On 24/05/2022 13:09, Greg Kroah-Hartman wrote:

...

I am seeing a boot regression on tegra124-jetson-tk1 and reverting the above
commit is fixing the problem. This also appears to impact linux-4.14.y,
4.19.y and 5.4.y.

Test results for stable-v4.9:
      8 builds:	8 pass, 0 fail
      18 boots:	16 pass, 2 fail
      18 tests:	18 pass, 0 fail

Linux version:	4.9.316-rc1-gbe4ec3e3faa1
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                  tegra210-p2371-2180, tegra30-cardhu-a04

Boot failures:	tegra124-jetson-tk1

Odd.  This is also in 5.10.y, right?  No issues there?  Are we missing
something?


Actually, the more I look at this, the more I see various intermittent
reports with this and it is also impacting the mainline.

The problem is that the commit in question is causing a ton of messages to
be printed a boot and this sometimes is causing the boot test to fail
because the boot is taking too long. The console shows ...

[ 1233.327547] CPU0: Spectre BHB: using loop workaround
[ 1233.327795] CPU1: Spectre BHB: using loop workaround
[ 1233.328270] CPU1: Spectre BHB: using loop workaround
[ 1233.328700] CPU1: Spectre BHB: using loop workaround
[ 1233.355477] CPU2: Spectre BHB: using loop workaround
** 7 printk messages dropped **
[ 1233.366271] CPU0: Spectre BHB: using loop workaround
[ 1233.366580] CPU0: Spectre BHB: using loop workaround
[ 1233.366815] CPU1: Spectre BHB: using loop workaround
[ 1233.405475] CPU1: Spectre BHB: using loop workaround
[ 1233.405874] CPU0: Spectre BHB: using loop workaround
[ 1233.406041] CPU1: Spectre BHB: using loop workaround
** 1 printk messages dropped **

There is a similar report of this [0] and I believe that we need a similar
fix for the above prints as well. I have reported this to Ard [1]. So I am
not sure that these Spectre BHB patches are quite ready for stable.

These patches are quite small, and just enable it for this known-broken
cpu type.

If there is an issue enabling it for this cpu type, then we can work on
that upstream, but there shouldn't be a reason to prevent this from
being merged now, especially given that it is supposed to be fixing a
known issue.

Jonathan any chance this is Tegra specific? Our ARCH_BRCMSTB SoCs which use a Brahma-B15 which uses nearly the same ca15 processor functions defined in arch/arm/mm/proc-v7.S reports the following *before* changes:

[    0.001641] CPU: Testing write buffer coherency: ok
[    0.001685] CPU0: Spectre v2: using ICIALLU workaround
[    0.001703] ftrace: allocating 30541 entries in 120 pages
[    0.044600] CPU0: update cpu_capacity 1024
[    0.044633] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.044662] Setting up static identity map for 0x200000 - 0x200060
[    0.047410] brcmstb: biuctrl: MCP: Write pairing already disabled
[    0.048974] CPU1: update cpu_capacity 1024
[    0.048978] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.048981] CPU1: Spectre v2: using ICIALLU workaround
[    0.050234] CPU2: update cpu_capacity 1024
[    0.050238] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.050241] CPU2: Spectre v2: using ICIALLU workaround
[    0.051437] CPU3: update cpu_capacity 1024
[    0.051441] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.051444] CPU3: Spectre v2: using ICIALLU workaround
[    0.051532] Brought up 4 CPUs

and this *after* merging 4.9.316-rc1:

[    0.001626] CPU: Testing write buffer coherency: ok
[    0.001670] CPU0: Spectre v2: using ICIALLU workaround
[    0.001689] CPU0: Spectre BHB: using loop workaround
[    0.001705] ftrace: allocating 30542 entries in 120 pages
[    0.043752] CPU0: update cpu_capacity 1024
[    0.043784] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.043813] Setting up static identity map for 0x200000 - 0x200060
[    0.046547] brcmstb: biuctrl: MCP: Write pairing already disabled
[    0.048121] CPU1: update cpu_capacity 1024
[    0.048124] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.048129] CPU1: Spectre v2: using ICIALLU workaround
[    0.048165] CPU1: Spectre BHB: using loop workaround
[    0.049398] CPU2: update cpu_capacity 1024
[    0.049402] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.049405] CPU2: Spectre v2: using ICIALLU workaround
[    0.049440] CPU2: Spectre BHB: using loop workaround
[    0.050613] CPU3: update cpu_capacity 1024
[    0.050617] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.050619] CPU3: Spectre v2: using ICIALLU workaround
[    0.050653] CPU3: Spectre BHB: using loop workaround
[    0.050722] Brought up 4 CPUs
[    0.050738] SMP: Total of 4 processors activated (216.00 BogoMIPS).
[    0.050753] CPU: All CPU(s) started in HYP mode.
--
Florian



[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux