Re: [RFC PATCH v2 4/6] ASoC: soc-pcm: tweak DPCM BE hw_param() call order

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 28-03-2022 20:41, Amadeusz Sławiński wrote:
On 3/28/2022 8:14 AM, Sameer Pujar wrote:
For DPCM links, the order of hw_param() call depends on the sequence of
BE connection to FE. It is possible that one BE link can provide clock
to another BE link. In such cases consumer BE DAI, to get the rate set
by provider BE DAI, can use the standard clock functions only if provider
has already set the appropriate rate during its hw_param() stage.

Above sentence seems to suggest that consumer can set clock only after
provider has started, but code in this patch seems to do it the other
way around?

This patch makes provider calls to happen first.


Presently the order is fixed and does not depend on the provider and
consumer relationships. So the clock rates need to be known ahead of
hw_param() stage.

This patch tweaks the hw_param() order by connecting the provider BEs
late to a FE. With this hw_param() calls for provider BEs happen first
and then followed by consumer BEs. The consumers can use the standard
clk_get_rate() function to get the rate of the clock they depend on.


I'm bit confused by " With this hw_param() calls for provider BEs happen
first and then followed by consumer BEs. "

Aren't consumers started first and provider second? Code and previous
sentence "connecting the provider BEs late to a FE" confuse me.

The dpcm_be_connect() call adds the new connection to a list using list_add() which would be a stack. When dpcm_be_connect() is deferred for provider BEs, these occupy top of the stack. When operating on this list during hw_params() stage, the provider call happen first. Is this part clear now? I can rephrase the comments/commit message for more clarity.



Overall I don't exactly understand correct order of events after reading
commit message and patch...

Consider there are two BEs (BE1 and BE2) and "BE1<==>BE2" can be an I2S interface for example. I am trying to get following sequence.

1. When BE1 is provider and BE2 is consumer, the call sequence expected is : hw_params(BE1) -> hw_params(BE2).

2. When BE2 is provider and BE1 is consumer, the call sequence expected is : hw_params(BE2) -> hw_params(BE1).

Idea is to make use of standard clock functions for rate info. Provider can use clk_set_rate() and consumer can clk_get_rate().

Signed-off-by: Sameer Pujar <spujar@xxxxxxxxxx>
---
  TODO:
   * The FE link is not considered in this. For Tegra it is fine to
     call hw_params() for FE at the end. But systems, which want to apply
     this tweak for FE as well, have to extend this tweak to FE.
   * Also only DPCM is considered here. If normal links require such
     tweak, it needs to be extended.

  sound/soc/soc-pcm.c | 60 ++++++++++++++++++++++++++++++++++++++++++++++++++++-
  1 file changed, 59 insertions(+), 1 deletion(-)

diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
index 9a95468..5829514 100644
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -1442,6 +1442,29 @@ static int dpcm_prune_paths(struct snd_soc_pcm_runtime *fe, int stream,
      return prune;
  }

+static bool defer_dpcm_be_connect(struct snd_soc_pcm_runtime *rtd)
+{
+     struct snd_soc_dai *dai;
+     int i;
+
+     if (!(rtd->dai_link->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK))
+             return false;
+
+     if ((rtd->dai_link->dai_fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) ==
+         SND_SOC_DAIFMT_CBC_CFC) {
+
+             for_each_rtd_cpu_dais(rtd, i, dai) {
+
+                     if (!snd_soc_dai_is_dummy(dai))
+                             return true;
+             }
+     }
+
+     return false;
+}
+
+#define MAX_CLK_PROVIDER_BE 10

Not sure about this define, it adds unnecessary limitation on max clock
number, can't you just run same loop twice while checking
defer_dpcm_be_connect() first time and !defer_dpcm_be_connect() second
time? defer_dpcm_be_connect() function name may need a bit of adjustment
(rtd_is_clock_consumer() maybe?), but it gets rid of the limit.

or do something like following instead of copy pasting loop twice:

rename original dpcm_add_paths() to _dpcm_add_paths() and add additional
argument and check somewhere inline:
static int dpcm_add_paths(struct snd_soc_pcm_runtime *fe, int stream,
       struct snd_soc_dapm_widget_list **list_, bool clock_consumer)
{
       ...

 // with renamed defer_dpcm_be_connect
       if (clock_consumer ^ !rtd_is_clock_consumer())
               continue;

       ...
}

static int dpcm_add_paths(struct snd_soc_pcm_runtime *fe, int stream,
       struct snd_soc_dapm_widget_list **list_)
{
       int ret;

       /* start clock consumer BEs */
       ret = _dpcm_add_paths(*fe, stream, **list_, true);
       if (ret)
               return ret;

       /* start clock provider BEs */
       ret = _dpcm_add_paths(*fe, stream, **list_, false);

       return ret;
}

Thanks for the suggestion. I will check if loop copy can be avoided.


+
  static int dpcm_add_paths(struct snd_soc_pcm_runtime *fe, int stream,
      struct snd_soc_dapm_widget_list **list_)
  {
@@ -1449,7 +1472,8 @@ static int dpcm_add_paths(struct snd_soc_pcm_runtime *fe, int stream,
      struct snd_soc_dapm_widget_list *list = *list_;
      struct snd_soc_pcm_runtime *be;
      struct snd_soc_dapm_widget *widget;
-     int i, new = 0, err;
+     struct snd_soc_pcm_runtime *prov[MAX_CLK_PROVIDER_BE];
+     int i, new = 0, err, count = 0;

      /* Create any new FE <--> BE connections */
      for_each_dapm_widgets(list, i, widget) {
@@ -1489,6 +1513,40 @@ static int dpcm_add_paths(struct snd_soc_pcm_runtime *fe, int stream,
                  (be->dpcm[stream].state != SND_SOC_DPCM_STATE_CLOSE))
                      continue;

+             /* Connect clock provider BEs at the end */
+             if (defer_dpcm_be_connect(be)) {
+                     if (count >= MAX_CLK_PROVIDER_BE) {
+                             dev_err(fe->dev, "ASoC: too many clock provider BEs\n");
+                             return -EINVAL;
+                     }
+
+                     prov[count++] = be;
+                     continue;
+             }
+
+             /* newly connected FE and BE */
+             err = dpcm_be_connect(fe, be, stream);
+             if (err < 0) {
+                     dev_err(fe->dev, "ASoC: can't connect %s\n",
+                             widget->name);
+                     break;
+             } else if (err == 0) /* already connected */
+                     continue;
+
+             /* new */
+             dpcm_set_be_update_state(be, stream, SND_SOC_DPCM_UPDATE_BE);
+             new++;
+     }
+
+     /*
+      * Now connect clock provider BEs. A late connection means,
+      * these BE links appear first in the list maintained by FE
+      * and hw_param() call for these happen first.

Let's stick to ALSA terminology, hw_params() please, same in commit message.

Sorry about this. I will fix it.




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux