Re: [PATCH V1 05/10] dt-bindings: PCI: tegra: Add device tree support for Tegra234

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Feb 05, 2022 at 09:51:39PM +0530, Vidya Sagar wrote:
> Add support for Tegra234 PCIe controllers. These controllers are based
> on Synopsys DesignWare core IP.
> 
> Signed-off-by: Vidya Sagar <vidyas@xxxxxxxxxx>
> ---
>  .../bindings/pci/nvidia,tegra194-pcie.txt     | 106 +++++++++++++++++-
>  1 file changed, 103 insertions(+), 3 deletions(-)

This falls above my threshold of convert this to schema first.

> 
> diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
> index 8e4f9bfb316d..ae9555a50fb0 100644
> --- a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
> @@ -10,6 +10,8 @@ Required properties:
>  - power-domains: A phandle to the node that controls power to the respective
>    PCIe controller and a specifier name for the PCIe controller. Following are
>    the specifiers for the different PCIe controllers
> +  Tegra194:
> +  ---------
>      TEGRA194_POWER_DOMAIN_PCIEX8B: C0
>      TEGRA194_POWER_DOMAIN_PCIEX1A: C1
>      TEGRA194_POWER_DOMAIN_PCIEX1A: C2
> @@ -18,6 +20,21 @@ Required properties:
>      TEGRA194_POWER_DOMAIN_PCIEX8A: C5
>    these specifiers are defined in
>    "include/dt-bindings/power/tegra194-powergate.h" file.
> +  Tegra234:
> +  ---------
> +    TEGRA234_POWER_DOMAIN_PCIEX4BA: C0
> +    TEGRA234_POWER_DOMAIN_PCIEX1A : C1
> +    TEGRA234_POWER_DOMAIN_PCIEX1A : C2
> +    TEGRA234_POWER_DOMAIN_PCIEX1A : C3
> +    TEGRA234_POWER_DOMAIN_PCIEX4BB: C4
> +    TEGRA234_POWER_DOMAIN_PCIEX8A : C5
> +    TEGRA234_POWER_DOMAIN_PCIEX4A : C6
> +    TEGRA234_POWER_DOMAIN_PCIEX8B : C7
> +    TEGRA234_POWER_DOMAIN_PCIEX4CA: C8
> +    TEGRA234_POWER_DOMAIN_PCIEX4CB: C9
> +    TEGRA234_POWER_DOMAIN_PCIEX4CC: C10
> +  these specifiers are defined in
> +  "include/dt-bindings/power/tegra234-powergate.h" file.
>  - reg: A list of physical base address and length pairs for each set of
>    controller registers. Must contain an entry for each entry in the reg-names
>    property.
> @@ -47,16 +64,33 @@ Required properties:
>    "p2u-N": where N ranges from 0 to one less than the total number of lanes
>  - nvidia,bpmp: Must contain a pair of phandle to BPMP controller node followed
>    by controller-id. Following are the controller ids for each controller.
> +  Tegra194:
> +  ---------
>      0: C0
>      1: C1
>      2: C2
>      3: C3
>      4: C4
>      5: C5
> +  Tegra194:
> +  ---------
> +    0 : C0
> +    1 : C1
> +    2 : C2
> +    3 : C3
> +    4 : C4
> +    5 : C5
> +    6 : C6
> +    7 : C7
> +    8 : C8
> +    9 : C9
> +    10: C10
>  - vddio-pex-ctl-supply: Regulator supply for PCIe side band signals
>  
>  RC mode:
> -- compatible: Tegra19x must contain  "nvidia,tegra194-pcie"
> +- compatible: Must be
> +  - "nvidia,tegra194-pcie" for Tegra194
> +  - "nvidia,tegra234-pcie" for Tegra234
>  - device_type: Must be "pci" for RC mode
>  - interrupt-names: Must include the following entries:
>    "msi": The Tegra interrupt that is asserted when an MSI is received
> @@ -99,7 +133,8 @@ In Tegra194, Only controllers C0, C4 & C5 support EP mode.
>  
>  Optional properties:
>  - pinctrl-names: A list of pinctrl state names.
> -  It is mandatory for C5 controller and optional for other controllers.
> +  It is mandatory for C5 controller in Tegra194 and optional for other
> +  controllers.
>    - "default": Configures PCIe I/O for proper operation.
>  - pinctrl-0: phandle for the 'default' state of pin configuration.
>    It is mandatory for C5 controller and optional for other controllers.
> @@ -108,7 +143,7 @@ Optional properties:
>      improve performance when a platform is designed in such a way that it
>      satisfies at least one of the following conditions thereby enabling root
>      port to exchange optimum number of FC (Flow Control) credits with
> -    downstream devices
> +    downstream devices. This is applicable for only Tegra194.
>      1. If C0/C4/C5 run at x1/x2 link widths (irrespective of speed and MPS)
>      2. If C0/C1/C2/C3/C4/C5 operate at their respective max link widths and
>         a) speed is Gen-2 and MPS is 256B
> @@ -119,6 +154,9 @@ Optional properties:
>     specified in microseconds
>  - nvidia,aspm-l0s-entrance-latency-us: ASPM L0s entrance latency to be
>     specified in microseconds
> +- nvidia,enable-srns: This boolean property needs to be present if the
> +   controller is configured to operate in SRNS (Separate Reference Clocks with
> +   No Spread-Spectrum Clocking). This is applicable only for Tegra234.
>  
>  RC mode:
>  - vpcie3v3-supply: A phandle to the regulator node that supplies 3.3V to the slot
> @@ -127,6 +165,9 @@ RC mode:
>  - vpcie12v-supply: A phandle to the regulator node that supplies 12V to the slot
>    if the platform has one such slot. (Ex:- x16 slot owned by C5 controller
>    in p2972-0000 platform).
> +- nvidia,enable-ext-refclk: This boolean property needs to be present if the
> +  controller is configured to use the reference clocking coming in from an
> +  external clock source instead of using the internal clock source.
>  
>  EP mode:
>  - nvidia,refclk-select-gpios: Must contain a phandle to a GPIO controller
> @@ -243,3 +284,62 @@ Tegra194 EP mode:
>  		phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
>  			    "p2u-5", "p2u-6", "p2u-7";
>  	};
> +
> +Tegra234 RP mode:
> +-----------------
> +
> +	pcie@141a0000 {
> +		compatible = "nvidia,tegra234-pcie";
> +		power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8A>;
> +		reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K)      */
> +		      <0x00 0x3a000000 0x0 0x00040000>, /* configuration space (256K) */
> +		      <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
> +		      <0x00 0x3a080000 0x0 0x00040000>; /* DBI reg space (256K)       */
> +		reg-names = "appl", "config", "atu_dma", "dbi";
> +
> +		status = "disabled";

Why is your example disabled?

> +
> +		#address-cells = <3>;
> +		#size-cells = <2>;
> +		device_type = "pci";
> +		num-lanes = <8>;
> +		num-viewport = <8>;
> +		linux,pci-domain = <5>;
> +
> +		clocks = <&bpmp TEGRA234_CLK_PEX1_C5_CORE>;
> +		clock-names = "core";
> +
> +		resets = <&bpmp TEGRA234_RESET_PEX1_CORE_5_APB>,
> +			 <&bpmp TEGRA234_RESET_PEX1_CORE_5>;
> +		reset-names = "apb", "core";
> +
> +		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
> +			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
> +		interrupt-names = "intr", "msi";
> +
> +		#interrupt-cells = <1>;
> +		interrupt-map-mask = <0 0 0 0>;
> +		interrupt-map = <0 0 0 0 &gic GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
> +
> +		nvidia,bpmp = <&bpmp 5>;
> +
> +		nvidia,aspm-cmrt-us = <60>;
> +		nvidia,aspm-pwr-on-t-us = <20>;
> +		nvidia,aspm-l0s-entrance-latency-us = <3>;
> +
> +		bus-range = <0x0 0xff>;
> +
> +		ranges = <0x43000000 0x27 0x40000000 0x27 0x40000000 0x3 0xe8000000>, /* prefetchable memory (16000 MB) */
> +			 <0x02000000 0x0  0x40000000 0x2b 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
> +			 <0x01000000 0x0  0x3a100000 0x00 0x3a100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
> +
> +		interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE5R &emc>,
> +				<&mc TEGRA234_MEMORY_CLIENT_PCIE5W &emc>;
> +		interconnect-names = "dma-mem", "write";
> +
> +                phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
> +                       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
> +                       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
> +                phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
> +                            "p2u-5", "p2u-6", "p2u-7";
> +	};
> -- 
> 2.17.1
> 
> 



[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux