Re: [PATCH v17 2/4] dmaengine: tegra: Add tegra gpcdma driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



31.01.2022 18:38, Akhil R пишет:
> Does the below method look good? bytes_xfer is updated on every ISR and in
> tx_status(), the wcount is read to calculate the intermittent value. If the transfer
> get complete in between, use wcount as 0 to add sg_req.len to bytes_xfer
> 
> static int tegra_dma_get_residual(struct tegra_dma_channel *tdc)
> {
> 	unsigned long wcount = 0, status;
> 	unsigned int bytes_xfer, residual;
> 	struct tegra_dma_desc *dma_desc = tdc->dma_desc;
> 	struct tegra_dma_sg_req *sg_req = dma_desc->sg_req;
> 
> 	/*
> 	 * Do not read from CHAN_XFER_COUNT if EOC bit is set
> 	 * as the transfer would have already completed and
> 	 * the register could have updated for next transfer
> 	 * in case of cyclic transfers.
> 	 */
> 	status = tdc_read(tdc, TEGRA_GPCDMA_CHAN_STATUS);
> 	if (!(status & TEGRA_GPCDMA_STATUS_ISE_EOC))
> 		wcount = tdc_read(tdc, TEGRA_GPCDMA_CHAN_XFER_COUNT);

You can't read WCOUNT after the STATUS without racing with the STATUS
updates made by h/w. You should read the WCOUNT first and only then
check the STATUS.

You should also check whether T20 tegra_dma_sg_bytes_xferred()
workarounds apply to newer h/w. I see that the h/w base hasn't changed
much since T20.

Otherwise looks okay.



[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux