> 13.01.2022 16:30, Akhil R пишет:
> > +static const struct tegra_i2c_hw_feature tegra234_i2c_hw = {
> > + .has_continue_xfer_support = true,
> > + .has_per_pkt_xfer_complete_irq = true,
> > + .clk_divisor_hs_mode = 0x2,
> > + .clk_divisor_std_mode = 0x4f,
> > + .clk_divisor_fast_mode = 0x58,
> > + .clk_divisor_fast_plus_mode = 0x24,
> > + .has_config_load_reg = true,
> > + .has_multi_master_mode = true,
> > + .has_slcg_override_reg = true,
> > + .has_mst_fifo = true,
> > + .quirks = &tegra194_i2c_quirks,
> > + .supports_bus_clear = true,
> > + .has_apb_dma = false,
> > + .tlow_std_mode = 0x8,
> > + .thigh_std_mode = 0x7,
> > + .tlow_fast_fastplus_mode = 0x1,
> > + .thigh_fast_fastplus_mode = 0x1,
> > + .setup_hold_time_std_mode = 0x08080808,
> > + .setup_hold_time_fast_fast_plus_mode = 0x02020202,
> > + .setup_hold_time_hs_mode = 0x090909,
> > + .has_interface_timing_reg = true, };
>
> Why tegra194_i2c_hw can't be reused by T234? Looks like I2C h/w hasn't
> changed and somebody just made a minor tuning of the timing parameters, does
> it really matter in practice?
The timing parameters are important to get the desired data rate for I2C. The values,
unfortunately, cannot be reused from Tegra194.
Thanks,
Akhil
--
nvpublic
