On Wed, 5 Jan 2022 at 12:08, Jon Hunter <jonathanh@xxxxxxxxxx> wrote:
>
> Hi Ard,
>
> On 28/12/2021 14:39, Geert Uytterhoeven wrote:
>
> ...
>
> >> As i don't have access to this hardware, I am going to have to rely on
> >> someone who does to debug this further. The only alternative is
> >> marking CONFIG_VMAP_STACK broken on MACH_EXYNOS but that would be
> >> unfortunate.
> >
> > Wish I had seen this thread before...
> >
> > I've just bisected a resume after s2ram failure on R-Car Gen2 to the same
> > commit a1c510d0adc604bb ("ARM: implement support for vmap'ed stacks")
> > in arm/for-next.
> >
> > Expected output:
> >
> > PM: suspend entry (deep)
> > Filesystems sync: 0.000 seconds
> > Freezing user space processes ... (elapsed 0.010 seconds) done.
> > OOM killer disabled.
> > Freezing remaining freezable tasks ... (elapsed 0.009 seconds) done.
> > Disabling non-boot CPUs ...
> >
> > [system suspended, this is also where it hangs on failure]
> >
> > Enabling non-boot CPUs ...
> > CPU1 is up
> > sh-eth ee700000.ethernet eth0: Link is Down
> > Micrel KSZ8041RNLI ee700000.ethernet-ffffffff:01: attached PHY
> > driver (mii_bus:phy_addr=ee700000.ethernet-ffffffff:01, irq=193)
> > OOM killer enabled.
> > Restarting tasks ... done.
> > PM: suspend exit
> >
> > Both wake-on-LAN and wake-up by gpio-keys fail.
> > Nothing interesting in the kernel log, cfr. above.
> >
> > Disabling CONFIG_VMAP_STACK fixes the issue for me.
> >
> > Just like arch/arm/mach-exynos/ (and others), arch/arm/mach-shmobile/
> > has several *.S files related to secondary CPU bringup.
>
>
> This is also breaking suspend on our 32-bit Tegra platforms. Reverting
> this change on top of -next fixes the problem.
>
Thanks for the report.
It would be helpful if you could provide some more context:
- does it happen on a LPAE build too?
- does it only happen on SMP capable systems?
- does it reproduce on such systems when using only a single CPU?
(i.e., pass 'nosmp' on the kernel command line)
- when passing 'no_console_suspend' on the kernel command line, are
any useful diagnostics produced?
- is there any way you could tell whether the crash/hang (assuming
that is what you are observing) occurs on the suspend path or on
resume?
- any other observations that could narrow this down?
Thanks,
Ard.
