On Tue, Dec 21, 2021 at 06:21:11PM +0530, Sumit Gupta wrote: > Add device-tree binding documentation to represent the axi2apb bridges > used by Control Backbone (CBB) 1.0 in Tegra194 SOC. All errors for APB > slaves are reported as slave error because APB bas single bit to report > error. So, CBB driver needs to further check error status registers of > all the axi2apb bridges to find error type. > > Signed-off-by: Sumit Gupta <sumitg@xxxxxxxxxx> > Signed-off-by: Thierry Reding <treding@xxxxxxxxxx> > --- > .../arm/tegra/nvidia,tegra194-axi2apb.yaml | 40 +++++++++++++++++++ > 1 file changed, 40 insertions(+) > create mode 100644 Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml > > diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml > new file mode 100644 > index 000000000000..788a13f8aa93 > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml > @@ -0,0 +1,40 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/arm/tegra/nvidia,tegra194-axi2apb.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > + > +title: NVIDIA Tegra194 AXI2APB bridge > + > +maintainers: > + - Sumit Gupta <sumitg@xxxxxxxxxx> > + > +properties: > + $nodename: > + pattern: "^axi2apb@([0-9a-f]+)$" > + > + compatible: > + enum: > + - nvidia,tegra194-axi2apb > + > + reg: > + maxItems: 6 > + description: Physical base address and length of registers for all bridges > + > +additionalProperties: false > + > +required: > + - compatible > + - reg > + > +examples: > + - | > + axi2apb: axi2apb@2390000 { As axi2apb appears to be a bus, then all the child nodes (APB devices) should be under this node. Is NVidia still putting all the devices at the root level rather than under a bus node which is preferred? > + compatible = "nvidia,tegra194-axi2apb"; > + reg = <0x02390000 0x1000>, > + <0x023a0000 0x1000>, > + <0x023b0000 0x1000>, > + <0x023c0000 0x1000>, > + <0x023d0000 0x1000>, > + <0x023e0000 0x1000>; > + }; > -- > 2.17.1 > >