RE: [PATCH v2] arm64: dts: imx8mp-evk: configure multiple queues on eqos

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> -----Original Message-----
> From: Xiaoliang Yang <xiaoliang.yang_1@xxxxxxx>
> Sent: 2021年12月13日 12:46
> To: robh+dt@xxxxxxxxxx; shawnguo@xxxxxxxxxx; s.hauer@xxxxxxxxxxxxxx;
> festevam@xxxxxxxxx
> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-tegra@xxxxxxxxxxxxxxx;
> dl-linux-imx <linux-imx@xxxxxxx>; kernel@xxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; Joakim Zhang <qiangqing.zhang@xxxxxxx>;
> Xiaoliang Yang <xiaoliang.yang_1@xxxxxxx>
> Subject: [PATCH v2] arm64: dts: imx8mp-evk: configure multiple queues on
> eqos
> 
> Eqos ethernet support five queues on hardware, enable these queues and
> configure the priority of each queue. Uses Strict Priority as scheduling
> algorithms to ensure that the TSN function works.
> 
> The priority of each queue is a bitmask value that maps VLAN tag priority to
> the queue. Since the hardware only supports five queues, this patch maps
> priority 0-4 to queues one by one, and priority 5-7 to queue 4.
> 
> The total fifo size of 5 queues is 8192 bytes, if enable 5 queues with
> store-and-forward mode, it's not enough for large packets, which would
> trigger fifo overflow frequently. This patch set DMA to thresh mode to
> enable all 5 queues.
> 
> Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@xxxxxxx>
> ---

Reviewed-by: Joakim Zhang <qiangqing.zhang@xxxxxxx>

Best Regards,
Joakim Zhang
>  arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 57
> ++++++++++++++++++++
>  1 file changed, 57 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> index 7b99fad6e4d6..e4c69594f067 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> @@ -86,6 +86,9 @@
>  	pinctrl-0 = <&pinctrl_eqos>;
>  	phy-mode = "rgmii-id";
>  	phy-handle = <&ethphy0>;
> +	snps,force_thresh_dma_mode;
> +	snps,mtl-tx-config = <&mtl_tx_setup>;
> +	snps,mtl-rx-config = <&mtl_rx_setup>;
>  	status = "okay";
> 
>  	mdio {
> @@ -99,6 +102,60 @@
>  			eee-broken-1000t;
>  		};
>  	};
> +
> +	mtl_tx_setup: tx-queues-config {
> +		snps,tx-queues-to-use = <5>;
> +		snps,tx-sched-sp;
> +		queue0 {
> +			snps,dcb-algorithm;
> +			snps,priority = <0x1>;
> +		};
> +		queue1 {
> +			snps,dcb-algorithm;
> +			snps,priority = <0x2>;
> +		};
> +		queue2 {
> +			snps,dcb-algorithm;
> +			snps,priority = <0x4>;
> +		};
> +		queue3 {
> +			snps,dcb-algorithm;
> +			snps,priority = <0x8>;
> +		};
> +		queue4 {
> +			snps,dcb-algorithm;
> +			snps,priority = <0xf0>;
> +		};
> +	};
> +	mtl_rx_setup: rx-queues-config {
> +		snps,rx-queues-to-use = <5>;
> +		snps,rx-sched-sp;
> +		queue0 {
> +			snps,dcb-algorithm;
> +			snps,priority = <0x1>;
> +			snps,map-to-dma-channel = <0>;
> +		};
> +		queue1 {
> +			snps,dcb-algorithm;
> +			snps,priority = <0x2>;
> +			snps,map-to-dma-channel = <1>;
> +		};
> +		queue2 {
> +			snps,dcb-algorithm;
> +			snps,priority = <0x4>;
> +			snps,map-to-dma-channel = <2>;
> +		};
> +		queue3 {
> +			snps,dcb-algorithm;
> +			snps,priority = <0x8>;
> +			snps,map-to-dma-channel = <3>;
> +		};
> +		queue4 {
> +			snps,dcb-algorithm;
> +			snps,priority = <0xf0>;
> +			snps,map-to-dma-channel = <4>;
> +		};
> +	};
>  };
> 
>  &fec {
> --
> 2.17.1





[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux