Re: [PATCH v5 05/24] ARM: tegra: Add device-tree for ASUS Transformer EeePad TF101

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Dec 08, 2021 at 08:35:50PM +0300, Dmitry Osipenko wrote:
> From: Nikola Milosavljevic <mnidza@xxxxxxxxxxx>
> 
> Add device-tree for Tegra20-based ASUS Transformer EeePad TF101.
> 
> Link: https://wiki.postmarketos.org/wiki/ASUS_Eee_Pad_Transformer_(asus-tf101)
> Co-developed-by: David Heidelberg <david@xxxxxxx>
> Signed-off-by: David Heidelberg <david@xxxxxxx>
> Co-developed-by: Svyatoslav Ryhel <clamor95@xxxxxxxxx>
> Signed-off-by: Svyatoslav Ryhel <clamor95@xxxxxxxxx>
> Co-developed-by: Antoni Aloy Torrens <aaloytorrens@xxxxxxxxx>
> Signed-off-by: Antoni Aloy Torrens <aaloytorrens@xxxxxxxxx>
> Signed-off-by: Nikola Milosavljevic <mnidza@xxxxxxxxxxx>
> Co-developed-by: Dmitry Osipenko <digetx@xxxxxxxxx>
> Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
> ---
>  arch/arm/boot/dts/Makefile               |    1 +
>  arch/arm/boot/dts/tegra20-asus-tf101.dts | 1191 ++++++++++++++++++++++
>  2 files changed, 1192 insertions(+)
>  create mode 100644 arch/arm/boot/dts/tegra20-asus-tf101.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 8a2dfdf01ce3..8fdebf7c1afe 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1304,6 +1304,7 @@ dtb-$(CONFIG_MACH_SUNIV) += \
>  	suniv-f1c100s-licheepi-nano.dtb
>  dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
>  	tegra20-acer-a500-picasso.dtb \
> +	tegra20-asus-tf101.dtb \
>  	tegra20-harmony.dtb \
>  	tegra20-colibri-eval-v3.dtb \
>  	tegra20-colibri-iris.dtb \
> diff --git a/arch/arm/boot/dts/tegra20-asus-tf101.dts b/arch/arm/boot/dts/tegra20-asus-tf101.dts
> new file mode 100644
> index 000000000000..4dc0722c28f5
> --- /dev/null
> +++ b/arch/arm/boot/dts/tegra20-asus-tf101.dts
> @@ -0,0 +1,1191 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/dts-v1/;
> +
> +#include <dt-bindings/input/atmel-maxtouch.h>
> +#include <dt-bindings/input/gpio-keys.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/thermal/thermal.h>
> +
> +#include "tegra20.dtsi"
> +#include "tegra20-cpu-opp.dtsi"
> +#include "tegra20-cpu-opp-microvolt.dtsi"
> +
> +/ {
> +	model = "ASUS EeePad Transformer TF101";
> +	compatible = "asus,tf101", "nvidia,tegra20";
> +	chassis-type = "convertible";
> +
> +	aliases {
> +		mmc0 = &sdmmc4; /* eMMC */
> +		mmc1 = &sdmmc3; /* MicroSD */
> +		mmc2 = &sdmmc1; /* WiFi */
> +
> +		rtc0 = &pmic;
> +		rtc1 = "/rtc@7000e000";
> +
> +		serial0 = &uartd;
> +		serial1 = &uartc; /* Bluetooth */
> +		serial2 = &uartb; /* GPS */
> +	};
> +
> +	/*
> +	 * The decompressor and also some bootloaders rely on a
> +	 * pre-existing /chosen node to be available to insert the
> +	 * command line and merge other ATAGS info.
> +	 */
> +	chosen {};
> +
> +	memory@0 {
> +		reg = <0x00000000 0x40000000>;
> +	};
> +
> +	reserved-memory {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		ramoops@2ffe0000 {
> +			compatible = "ramoops";
> +			reg = <0x2ffe0000 0x10000>;	/* 64kB */
> +			console-size = <0x8000>;	/* 32kB */
> +			record-size = <0x400>;		/*  1kB */
> +			ecc-size = <16>;
> +		};
> +
> +		linux,cma@30000000 {
> +			compatible = "shared-dma-pool";
> +			alloc-ranges = <0x30000000 0x10000000>;
> +			size = <0x10000000>; /* 256MiB */
> +			linux,cma-default;
> +			reusable;
> +		};
> +	};
> +
> +	host1x@50000000 {
> +		dc@54200000 {
> +			rgb {
> +				status = "okay";
> +
> +				port@0 {
> +					lcd_output: endpoint {
> +						remote-endpoint = <&lvds_encoder_input>;
> +						bus-width = <18>;
> +					};
> +				};
> +			};
> +		};
> +
> +		hdmi@54280000 {
> +			status = "okay";
> +
> +			vdd-supply = <&hdmi_vdd_reg>;
> +			pll-supply = <&hdmi_pll_reg>;
> +			hdmi-supply = <&vdd_hdmi_en>;
> +
> +			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
> +			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
> +				GPIO_ACTIVE_HIGH>;
> +		};
> +	};
> +
> +	gpio@6000d000 {
> +		charging-enable-hog {
> +			gpio-hog;
> +			gpios = <TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
> +			output-low;
> +		};
> +	};

Isn't this something that we may want to change at some point? My
understanding is that GPIO hogs are permanent, so it won't be possible
to grab GPIO R.6 and change this.

Are there any plans to allow setting this at runtime?

[...]
> +	i2c2: i2c@7000c400 {
> +		status = "okay";
> +		clock-frequency = <100000>;
> +	};
> +
> +	i2cmux {

This doesn't belong here. The ordering is by unit-address and everything
without unit-address needs to move after the nodes with unit-addresses
and be sorted alphabetically.

> +		compatible = "i2c-mux-pinctrl";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		i2c-parent = <&i2c2>;
> +
> +		pinctrl-names = "ddc", "pta", "idle";
> +		pinctrl-0 = <&state_i2cmux_ddc>;
> +		pinctrl-1 = <&state_i2cmux_pta>;
> +		pinctrl-2 = <&state_i2cmux_idle>;
> +
> +		hdmi_ddc: i2c@0 {
> +			reg = <0>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +		};
> +
> +		lvds_ddc: i2c@1 {
> +			reg = <1>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			smart-battery@b {
> +				compatible = "ti,bq20z75", "sbs,sbs-battery";
> +				reg = <0xb>;
> +				sbs,i2c-retry-count = <2>;
> +				sbs,poll-retry-count = <10>;
> +				power-supplies = <&mains>;
> +			};
> +		};
> +	};
> +
> +	i2c@7000c500 {
> +		status = "okay";
> +		clock-frequency = <400000>;
> +	};
> +
> +	i2c@7000d000 {
> +		status = "okay";
> +		clock-frequency = <400000>;
> +
> +		pmic: pmic@34 {
> +			compatible = "ti,tps6586x";
> +			reg = <0x34>;
> +			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
> +
> +			ti,system-power-controller;
> +
> +			#gpio-cells = <2>;
> +			gpio-controller;
> +
> +			sys-supply = <&vdd_5v0_sys>;
> +			vin-sm0-supply = <&sys_reg>;
> +			vin-sm1-supply = <&sys_reg>;
> +			vin-sm2-supply = <&sys_reg>;
> +			vinldo01-supply = <&sm2_reg>;
> +			vinldo23-supply = <&sm2_reg>;
> +			vinldo4-supply = <&sm2_reg>;
> +			vinldo678-supply = <&sm2_reg>;
> +			vinldo9-supply = <&sm2_reg>;
> +
> +			regulators {
> +				sys_reg: sys {
> +					regulator-name = "vdd_sys";
> +					regulator-always-on;
> +				};
> +
> +				vdd_core: sm0 {
> +					regulator-name = "vdd_sm0,vdd_core";
> +					regulator-min-microvolt = <950000>;
> +					regulator-max-microvolt = <1300000>;
> +					regulator-coupled-with = <&rtc_vdd &vdd_cpu>;
> +					regulator-coupled-max-spread = <170000 550000>;
> +					regulator-always-on;
> +					regulator-boot-on;
> +
> +					nvidia,tegra-core-regulator;
> +				};
> +
> +				vdd_cpu: sm1 {
> +					regulator-name = "vdd_sm1,vdd_cpu";
> +					regulator-min-microvolt = <750000>;
> +					regulator-max-microvolt = <1125000>;
> +					regulator-coupled-with = <&vdd_core &rtc_vdd>;
> +					regulator-coupled-max-spread = <550000 550000>;
> +					regulator-always-on;
> +					regulator-boot-on;
> +
> +					nvidia,tegra-cpu-regulator;
> +				};
> +
> +				sm2_reg: sm2 {
> +					regulator-name = "vdd_sm2,vin_ldo*";
> +					regulator-min-microvolt = <3700000>;
> +					regulator-max-microvolt = <3700000>;
> +					regulator-always-on;
> +				};
> +
> +				/* LDO0 is not connected to anything */
> +
> +				ldo1 {
> +					regulator-name = "vdd_ldo1,avdd_pll*";
> +					regulator-min-microvolt = <1100000>;
> +					regulator-max-microvolt = <1100000>;
> +					regulator-always-on;
> +				};
> +
> +				rtc_vdd: ldo2 {
> +					regulator-name = "vdd_ldo2,vdd_rtc";
> +					regulator-min-microvolt = <950000>;
> +					regulator-max-microvolt = <1300000>;
> +					regulator-coupled-with = <&vdd_core &vdd_cpu>;
> +					regulator-coupled-max-spread = <170000 550000>;
> +					regulator-always-on;
> +					regulator-boot-on;
> +
> +					nvidia,tegra-rtc-regulator;
> +				};
> +
> +				ldo3 {
> +					regulator-name = "vdd_ldo3,avdd_usb*";
> +					regulator-min-microvolt = <3300000>;
> +					regulator-max-microvolt = <3300000>;
> +					regulator-always-on;
> +				};
> +
> +				ldo4 {
> +					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
> +					regulator-min-microvolt = <1800000>;
> +					regulator-max-microvolt = <1800000>;
> +					regulator-always-on;
> +				};
> +
> +				vcore_emmc: ldo5 {
> +					regulator-name = "vdd_ldo5,vcore_mmc";
> +					regulator-min-microvolt = <2850000>;
> +					regulator-max-microvolt = <2850000>;
> +					regulator-always-on;
> +				};
> +
> +				ldo6 {
> +					regulator-name = "vdd_ldo6,avdd_vdac";
> +					regulator-min-microvolt = <1800000>;
> +					regulator-max-microvolt = <1800000>;
> +				};
> +
> +				hdmi_vdd_reg: ldo7 {
> +					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
> +					regulator-min-microvolt = <3300000>;
> +					regulator-max-microvolt = <3300000>;
> +				};
> +
> +				hdmi_pll_reg: ldo8 {
> +					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
> +					regulator-min-microvolt = <1800000>;
> +					regulator-max-microvolt = <1800000>;
> +				};
> +
> +				ldo9 {
> +					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
> +					regulator-min-microvolt = <2850000>;
> +					regulator-max-microvolt = <2850000>;
> +					regulator-always-on;
> +				};
> +
> +				ldo_rtc {
> +					regulator-name = "vdd_rtc_out,vdd_cell";
> +					regulator-min-microvolt = <3300000>;
> +					regulator-max-microvolt = <3300000>;
> +					regulator-always-on;
> +				};
> +			};
> +		};
> +
> +		nct1008: temperature-sensor@4c {
> +			compatible = "onnn,nct1008";
> +			reg = <0x4c>;
> +			vcc-supply = <&vdd_3v3_sys>;
> +
> +			interrupt-parent = <&gpio>;
> +			interrupts = <TEGRA_GPIO(N, 6) IRQ_TYPE_EDGE_FALLING>;
> +
> +			#thermal-sensor-cells = <1>;
> +		};
> +	};
> +
> +	pmc@7000e400 {
> +		nvidia,invert-interrupt;
> +		nvidia,suspend-mode = <1>;
> +		nvidia,cpu-pwr-good-time = <2000>;
> +		nvidia,cpu-pwr-off-time = <100>;
> +		nvidia,core-pwr-good-time = <3845 3845>;
> +		nvidia,core-pwr-off-time = <458>;
> +		nvidia,sys-clock-req-active-high;
> +		core-supply = <&vdd_core>;
> +	};
> +
> +	/* Peripheral USB via ASUS connector */
> +	usb@c5000000 {
> +		compatible = "nvidia,tegra20-udc";
> +		status = "okay";
> +		dr_mode = "peripheral";
> +	};
> +
> +	usb-phy@c5000000 {
> +		status = "okay";
> +		dr_mode = "peripheral";
> +		nvidia,xcvr-setup-use-fuses;
> +		nvidia,xcvr-lsfslew = <2>;
> +		nvidia,xcvr-lsrslew = <2>;
> +		vbus-supply = <&vdd_5v0_sys>;
> +	};
> +
> +	/* Dock's USB port */
> +	usb@c5008000 {
> +		status = "okay";
> +	};
> +
> +	usb-phy@c5008000 {
> +		status = "okay";
> +		nvidia,xcvr-setup-use-fuses;
> +		vbus-supply = <&vdd_5v0_sys>;
> +	};
> +
> +	brcm_wifi_pwrseq: wifi-pwrseq {
> +		compatible = "mmc-pwrseq-simple";
> +
> +		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
> +		clock-names = "ext_clock";
> +
> +		reset-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_LOW>;
> +		post-power-on-delay-ms = <200>;
> +		power-off-delay-us = <200>;
> +	};
> +
> +	sdmmc1: mmc@c8000000 {
> +		status = "okay";
> +
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		assigned-clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
> +		assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_C>;
> +		assigned-clock-rates = <40000000>;
> +
> +		max-frequency = <40000000>;
> +		keep-power-in-suspend;
> +		bus-width = <4>;
> +		non-removable;
> +
> +		mmc-pwrseq = <&brcm_wifi_pwrseq>;
> +		vmmc-supply = <&vdd_3v3_sys>;
> +		vqmmc-supply = <&vdd_3v3_sys>;
> +
> +		/* Azurewave AW-NH615 BCM4329B1 */
> +		wifi@1 {
> +			compatible = "brcm,bcm4329-fmac";
> +			reg = <1>;
> +
> +			interrupt-parent = <&gpio>;
> +			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "host-wake";
> +		};
> +	};
> +
> +	sdmmc3: mmc@c8000400 {
> +		status = "okay";
> +		bus-width = <4>;
> +		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
> +		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
> +		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
> +		vmmc-supply = <&vdd_3v3_sys>;
> +		vqmmc-supply = <&vdd_3v3_sys>;
> +	};
> +
> +	sdmmc4: mmc@c8000600 {
> +		status = "okay";
> +		bus-width = <8>;
> +		vmmc-supply = <&vcore_emmc>;
> +		vqmmc-supply = <&vdd_3v3_sys>;
> +		non-removable;
> +	};
> +
> +	mains: ac-adapter-detect {
> +		compatible = "gpio-charger";
> +		charger-type = "mains";
> +		gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
> +	};
> +
> +	backlight: backlight {
> +		compatible = "pwm-backlight";
> +
> +		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
> +		power-supply = <&vdd_3v3_sys>;
> +		pwms = <&pwm 2 4000000>;
> +
> +		brightness-levels = <7 255>;
> +		num-interpolated-steps = <248>;
> +		default-brightness-level = <20>;
> +	};
> +
> +	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
> +	clk32k_in: clock-32k-in {
> +		compatible = "fixed-clock";
> +		clock-frequency = <32768>;
> +		#clock-cells = <0>;
> +	};
> +
> +	cpus {
> +		cpu0: cpu@0 {
> +			cpu-supply = <&vdd_cpu>;
> +			operating-points-v2 = <&cpu0_opp_table>;
> +			#cooling-cells = <2>;
> +		};
> +
> +		cpu1: cpu@1 {
> +			cpu-supply = <&vdd_cpu>;
> +			operating-points-v2 = <&cpu0_opp_table>;
> +			#cooling-cells = <2>;
> +		};
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +
> +		dock-hall-sensor {
> +			label = "Lid";
> +			gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>;
> +			linux,input-type = <EV_SW>;
> +			linux,code = <SW_LID>;
> +			debounce-interval = <500>;
> +			wakeup-event-action = <EV_ACT_ASSERTED>;
> +			wakeup-source;
> +		};
> +
> +		power {
> +			label = "Power";
> +			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_POWER>;
> +			debounce-interval = <10>;
> +			wakeup-event-action = <EV_ACT_ASSERTED>;
> +			wakeup-source;
> +		};
> +
> +		volume-up {
> +			label = "Volume Up";
> +			gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_VOLUMEUP>;
> +			debounce-interval = <10>;
> +			wakeup-event-action = <EV_ACT_ASSERTED>;
> +			wakeup-source;
> +		};
> +
> +		volume-down {
> +			label = "Volume Down";
> +			gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_VOLUMEDOWN>;
> +			debounce-interval = <10>;
> +			wakeup-event-action = <EV_ACT_ASSERTED>;
> +			wakeup-source;
> +		};
> +	};
> +
> +	lvds-encoder {
> +		compatible = "ti,sn75lvds83", "lvds-encoder";
> +
> +		powerdown-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_LOW>;
> +		power-supply = <&vdd_3v3_sys>;
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +
> +				lvds_encoder_input: endpoint {
> +					remote-endpoint = <&lcd_output>;
> +				};
> +			};
> +
> +			port@1 {
> +				reg = <1>;
> +
> +				lvds_encoder_output: endpoint {
> +					remote-endpoint = <&panel_input>;
> +				};
> +			};
> +		};
> +	};
> +
> +	display-panel {
> +		compatible = "panel-lvds";
> +
> +		/* AUO B101EW05 using custom timings */
> +
> +		backlight = <&backlight>;
> +		ddc-i2c-bus = <&lvds_ddc>;
> +		power-supply = <&vdd_pnl_reg>;
> +
> +		width-mm = <218>;
> +		height-mm = <135>;
> +
> +		data-mapping = "jeida-18";
> +
> +		panel-timing {
> +			clock-frequency = <71200000>;
> +			hactive = <1280>;
> +			vactive = <800>;
> +			hfront-porch = <8>;
> +			hback-porch = <18>;
> +			hsync-len = <184>;
> +			vsync-len = <3>;
> +			vfront-porch = <4>;
> +			vback-porch = <8>;
> +		};
> +
> +		port {
> +			panel_input: endpoint {
> +				remote-endpoint = <&lvds_encoder_output>;
> +			};
> +		};
> +	};
> +
> +	vdd_5v0_sys: regulator-0 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vdd_5v0";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-always-on;
> +	};
> +
> +	vdd_3v3_sys: regulator-1 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vdd_3v3_vs";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-always-on;
> +		vin-supply = <&vdd_5v0_sys>;
> +	};
> +
> +	regulator-2 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "pcie_vdd";
> +		regulator-min-microvolt = <1500000>;
> +		regulator-max-microvolt = <1500000>;
> +		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
> +		regulator-always-on;
> +	};
> +
> +	vdd_pnl_reg: regulator-3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vdd_pnl";
> +		regulator-min-microvolt = <2800000>;
> +		regulator-max-microvolt = <2800000>;
> +		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
> +	vdd_1v8_sys: regulator-4 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vdd_1v8_vs";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		regulator-always-on;
> +		vin-supply = <&vdd_5v0_sys>;
> +	};
> +
> +	vdd_hdmi_en: regulator-5 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vdd_5v0_hdmi_en";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-always-on;
> +		vin-supply = <&vdd_5v0_sys>;
> +		gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
> +	sound {
> +		compatible = "asus,tegra-audio-wm8903-tf101",
> +			     "nvidia,tegra-audio-wm8903";
> +		nvidia,model = "Asus EeePad Transformer WM8903";
> +
> +		nvidia,audio-routing =
> +			"Headphone Jack", "HPOUTR",
> +			"Headphone Jack", "HPOUTL",
> +			"Int Spk", "ROP",
> +			"Int Spk", "RON",
> +			"Int Spk", "LOP",
> +			"Int Spk", "LON",
> +			"Mic Jack", "MICBIAS",
> +			"IN1L", "Mic Jack";
> +
> +		nvidia,i2s-controller = <&tegra_i2s1>;
> +		nvidia,audio-codec = <&wm8903>;
> +
> +		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
> +		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
> +		nvidia,headset;
> +
> +		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
> +			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
> +			 <&tegra_car TEGRA20_CLK_CDEV1>;
> +		clock-names = "pll_a", "pll_a_out0", "mclk";
> +	};
> +
> +	thermal-zones {
> +		skin-thermal {
> +			polling-delay-passive = <1000>; /* milliseconds */
> +			polling-delay = <0>; /* milliseconds */
> +
> +			thermal-sensors = <&nct1008 0>;
> +		};
> +
> +		cpu-thermal {
> +			polling-delay-passive = <1000>; /* milliseconds */
> +			polling-delay = <5000>; /* milliseconds */
> +
> +			thermal-sensors = <&nct1008 1>;
> +
> +			trips {
> +				trip0: cpu-alert0 {
> +					/* start throttling at 50C */
> +					temperature = <50000>;
> +					hysteresis = <200>;
> +					type = "passive";
> +				};
> +
> +				trip1: cpu-crit {
> +					/* shut down at 60C */
> +					temperature = <60000>;
> +					hysteresis = <2000>;
> +					type = "critical";
> +				};
> +			};
> +
> +			cooling-maps {
> +				map0 {
> +					trip = <&trip0>;
> +					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +			};
> +		};
> +	};
> +
> +	memory-controller@7000f400 {
> +		nvidia,use-ram-code;
> +
> +		emc-tables@3 {
> +			reg = <0x3>;
> +
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			lpddr2 {
> +				compatible = "elpida,B8132B2PB-6D-F", "jedec,lpddr2-s4";
> +				revision-id1 = <1>;
> +				density = <2048>;
> +				io-width = <16>;
> +			};
> +
> +			emc-table@25000 {

Ugh... looking at the bindings for this the naming here is rather
unfortunate. emc-tables@3 and emc-table@*... the top-level emc-tables
are really tables, but the emc-table@* are really entries or rows in
that table, not tables themselves. It's also rather unfortunate that we
duplicate the frequency in both the "reg" and "clock-frequency"
properties. One of them would've been enough.

Anyway, looks like this has basically been like this since forever, so
not much that can be done about it.

Again, the memory-controller node needs to be sorted differently. There
are other occurrences of this throughout the file.

Thierry

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux