09.12.2021 20:33, Thierry Reding пишет:
> From: Thierry Reding <treding@xxxxxxxxxx>
>
> The Medcom Wide and PAZ00 boards don't specify the power supply for the
> backlight, which means that the Linux driver will provide a dummy one.
> Wire up an explicit dummy to also make the DT schema validation succeed.
> Unfortunately I don't have access to the schematics for these boards, so
> I don't know if a more accurate description is possible.
>
> Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
> ---
> arch/arm/boot/dts/tegra20-medcom-wide.dts | 3 +++
> arch/arm/boot/dts/tegra20-paz00.dts | 3 +++
> 2 files changed, 6 insertions(+)
>
> diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts
> index ed0e4012e140..b072d715999e 100644
> --- a/arch/arm/boot/dts/tegra20-medcom-wide.dts
> +++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts
> @@ -54,6 +54,9 @@ backlight: backlight {
>
> brightness-levels = <0 4 8 16 32 64 128 255>;
> default-brightness-level = <6>;
> +
> + /* dummy */
> + power-supply = <&vdd_5v0_reg>;
> };
>
> panel: panel {
> diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
> index e4c6c1363fc5..dd80108ac72c 100644
> --- a/arch/arm/boot/dts/tegra20-paz00.dts
> +++ b/arch/arm/boot/dts/tegra20-paz00.dts
> @@ -571,6 +571,9 @@ backlight: backlight {
>
> brightness-levels = <0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 255>;
> default-brightness-level = <10>;
> +
> + /* dummy */
> + power-supply = <&p5valw_reg>;
> };
>
> clk32k_in: clock-32k {
>
I think David's patches should be more correct [1][2]. Very unlikely
that 5v is used directly for backlight. I looked at the AC100 patch
previously, checking schematics. You can download paz00 schematics from
the internet [3].
[1]
https://github.com/okias/linux/commit/0a24a3097b2dcb6bb81b13197a2d4836f858199e
[2]
https://github.com/okias/linux/commit/98a2a32c482d0ffd59d96d22ae4169cc3d0ff15d
[3]
https://www.s-manuals.com/pdf/motherboard/compal/compal_la-6352p_r1.0a_schematics.pdf
