From: Thierry Reding <treding@xxxxxxxxxx>
Make the order of the clocks and clock-names properties match the order
in the device tree bindings. This isn't strictly necessary from a point
of view of the operating system because matching will be done based on
the clock-names, but it makes it easier to validate the device trees
against the DT schema.
Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
arch/arm64/boot/dts/nvidia/tegra132.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index 16673d3bf6f9..e41671fcd7e3 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -674,8 +674,8 @@ usb@70090000 {
<&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>,
<&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>,
<&tegra_car TEGRA124_CLK_XUSB_SS>,
- <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
<&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>,
+ <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
<&tegra_car TEGRA124_CLK_XUSB_HS_SRC>,
<&tegra_car TEGRA124_CLK_XUSB_FS_SRC>,
<&tegra_car TEGRA124_CLK_PLL_U_480M>,
@@ -683,7 +683,7 @@ usb@70090000 {
<&tegra_car TEGRA124_CLK_PLL_E>;
clock-names = "xusb_host", "xusb_host_src",
"xusb_falcon_src", "xusb_ss",
- "xusb_ss_src", "xusb_ss_div2",
+ "xusb_ss_div2", "xusb_ss_src",
"xusb_hs_src", "xusb_fs_src",
"pll_u_480m", "clk_m", "pll_e";
resets = <&tegra_car 89>, <&tegra_car 156>,
--
2.34.1
