From: Thierry Reding <treding@xxxxxxxxxx>
The AS3722 pinmux device tree node doesn't have a "reg" property and
therefore must not have a unit-address, so drop it.
While at it, add missing unit-addresses for the charger and smart
battery IC's on the ChromeOS embedded controller's I2C tunnel bus.
Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
arch/arm64/boot/dts/nvidia/tegra132-norrin.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
index c84ed1cb9a8c..f9604968c01f 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
@@ -564,7 +564,7 @@ as3722: pmic@40 {
pinctrl-names = "default";
pinctrl-0 = <&as3722_default>;
- as3722_default: pinmux@0 {
+ as3722_default: pinmux {
gpio0 {
pins = "gpio0";
function = "gpio";
@@ -770,7 +770,7 @@ i2c_20: i2c-tunnel {
google,remote-bus = <0>;
- charger: bq24735 {
+ charger: bq24735@9 {
compatible = "ti,bq24735";
reg = <0x9>;
interrupt-parent = <&gpio>;
@@ -781,7 +781,7 @@ TEGRA_GPIO(J, 0)
GPIO_ACTIVE_HIGH>;
};
- battery: smart-battery {
+ battery: smart-battery@b {
compatible = "sbs,sbs-battery";
reg = <0xb>;
sbs,i2c-retry-count = <2>;
--
2.34.1
