From: Mikko Perttunen <mperttunen@xxxxxxxxxx>
Add missing properties to the eMMC controller, as required to use it on
actual hardware.
Signed-off-by: Mikko Perttunen <mperttunen@xxxxxxxxxx>
Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
arch/arm64/boot/dts/nvidia/tegra234.dtsi | 19 ++++++++++++++++---
1 file changed, 16 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
index 844cab44aee6..ffe300356e85 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
@@ -40,11 +40,24 @@ mmc@3460000 {
compatible = "nvidia,tegra234-sdhci", "nvidia,tegra186-sdhci";
reg = <0x03460000 0x20000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&bpmp TEGRA234_CLK_SDMMC4>;
- clock-names = "sdhci";
+ clocks = <&bpmp TEGRA234_CLK_SDMMC4>,
+ <&bpmp TEGRA234_CLK_SDMMC_LEGACY_TM>;
+ clock-names = "sdhci", "tmclk";
+ assigned-clocks = <&bpmp TEGRA234_CLK_SDMMC4>,
+ <&bpmp TEGRA234_CLK_PLLC4>;
+ assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLC4>;
resets = <&bpmp TEGRA234_RESET_SDMMC4>;
reset-names = "sdhci";
- dma-coherent;
+ nvidia,pad-autocal-pull-up-offset-hs400 = <0x00>;
+ nvidia,pad-autocal-pull-down-offset-hs400 = <0x00>;
+ nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>;
+ nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x0a>;
+ nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x0a>;
+ nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x0a>;
+ nvidia,default-tap = <0x8>;
+ nvidia,default-trim = <0x14>;
+ nvidia,dqs-trim = <40>;
+ supports-cqe;
status = "disabled";
};
--
2.33.1
