Re: [PATCH v8 07/34] clk: tegra: Support runtime PM and power domain

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Aug 18, 2021 at 08:11:03PM +0300, Dmitry Osipenko wrote:
> 18.08.2021 19:42, Thierry Reding пишет:
> > On Wed, Aug 18, 2021 at 06:05:21PM +0300, Dmitry Osipenko wrote:
> >> 18.08.2021 17:07, Thierry Reding пишет:
> >>> On Tue, Aug 17, 2021 at 04:27:27AM +0300, Dmitry Osipenko wrote:
> >>> [...]
> >>>> +struct clk *tegra_clk_register(struct clk_hw *hw)
> >>>> +{
> >>>> +	struct platform_device *pdev;
> >>>> +	struct device *dev = NULL;
> >>>> +	struct device_node *np;
> >>>> +	const char *dev_name;
> >>>> +
> >>>> +	np = tegra_clk_get_of_node(hw);
> >>>> +
> >>>> +	if (!of_device_is_available(np))
> >>>> +		goto put_node;
> >>>> +
> >>>> +	dev_name = kasprintf(GFP_KERNEL, "tegra_clk_%s", hw->init->name);
> >>>> +	if (!dev_name)
> >>>> +		goto put_node;
> >>>> +
> >>>> +	pdev = of_platform_device_create(np, dev_name, NULL);
> >>>> +	if (!pdev) {
> >>>> +		pr_err("%s: failed to create device for %pOF\n", __func__, np);
> >>>> +		kfree(dev_name);
> >>>> +		goto put_node;
> >>>> +	}
> >>>> +
> >>>> +	dev = &pdev->dev;
> >>>> +	pm_runtime_enable(dev);
> >>>> +put_node:
> >>>> +	of_node_put(np);
> >>>> +
> >>>> +	return clk_register(dev, hw);
> >>>> +}
> >>>
> >>> This looks wrong. Why do we need struct platform_device objects for each
> >>> of these clocks? That's going to be a massive amount of platform devices
> >>> and they will completely mess up sysfs.
> >>
> >> RPM works with a device. It's not a massive amount of devices, it's one
> >> device for T20 and four devices for T30.
> > 
> > I'm still not sure I understand why we need to call RPM functions on a
> > clock. And even if they are few, it seems wrong to make these platform
> > devices.
> 
> Before clock is enabled, we need to raise core voltage. After clock is
> disabled, the voltage should be dropped. CCF+RPM takes care of handling
> this for us.

That's the part that I do understand. What I don't understand is why a
clock needs to be runtime suspend/resumed. Typically we suspend/resume
devices, and doing so typically involves disabling/enabling clocks. So
I don't understand why the clocks themselves now need to be runtime
suspended/resumed.

> > Perhaps they can be simple struct device:s instead? Ideally they would
> > also be parented to the CAR so that they appear in the right place in
> > the sysfs hierarchy.
> 
> Could you please clarify what do you mean by 'simple struct device:s'?
> These clock devices should be OF devices with a of_node and etc,
> otherwise we can't use OPP framework.

Perhaps I misunderstand the goal of the OPP framework. My understanding
was that this was to attach a table of operating points with a device so
that appropriate operating points could be selected and switched to when
the workload changes.

Typically these operating points would be roughly a clock rate and a
corresponding voltage for a regulator, so that when a certain clock rate
is requested, the regulator can be set to the matching voltage.

Hm... so is it that each of these clocks that you want to create a
platform device for has its own regulator? Because the patch series only
mentions the CORE domain, so I assumed that we would accumulate all the
clock rates for the clocks that are part of that CORE domain and then
derive a voltage to be supplied to that CORE domain.

But perhaps I just don't understand correctly how this is tied together.

> We don't have driver for CAR to bind. I guess we could try to add a
> 'dummy' CAR driver that will create sub-devices for the rpm-clocks, is
> this what you're wanting?

I got confused by the "tegra-clock" driver that this series was adding.
This is actually a driver that will bind to the virtual clocks rather
than the CAR device itself.

For some reason I had assumed that you wanted to create a CAR driver in
order to get at the struct device embedded in the CAR's platform device
and use that as the parent for all these clocks.

So even if we absolutely need some struct device for these clocks, maybe
adding that CAR driver and making the clock struct device:s children of
the CAR device will help keep a bit of a proper hierarchy in sysfs.

Thierry

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux