On Mon, Jul 05, 2021 at 01:54:23AM +0300, Dmitry Osipenko wrote:
> In order to support OTG mode we need these new properties:
>
> - interrupt
> - nvidia,pmc
> - nvidia,phy-instance
>
> The nvidia,phy-instance isn't strictly needed for the OTG mode since we
> know that only first controller supports it in practice, but it will be
> needed in general for supporting more complex hardware features that
> require knowledge of the PHY offset within common registers of the Power
> Management controller (PMC).
>
> Add the new properties to the bindings.
>
> Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
> ---
> .../bindings/phy/nvidia,tegra20-usb-phy.yaml | 20 +++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml b/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml
> index 593187234e6a..a108f1552042 100644
> --- a/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml
> @@ -77,6 +77,9 @@ properties:
> - const: timer
> - const: utmi-pads
>
> + interrupts:
> + maxItems: 1
> +
> resets:
> oneOf:
> - maxItems: 1
> @@ -199,6 +202,17 @@ properties:
> maxItems: 1
> description: GPIO used to reset the PHY.
>
> + nvidia,pmc:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + Phandle to Power Management controller.
> +
Add a cell to this for the PHY reg offset and then get rid of the index:
> + nvidia,phy-instance:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 2
> + description: Unique hardware ID.
> +
> required:
> - compatible
> - reg
> @@ -320,6 +334,7 @@ examples:
> compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
> reg = <0x7d008000 0x4000>,
> <0x7d000000 0x4000>;
> + interrupts = <0 97 4>;
> phy_type = "utmi";
> clocks = <&tegra_car TEGRA124_CLK_USB3>,
> <&tegra_car TEGRA124_CLK_PLL_U>,
> @@ -338,6 +353,8 @@ examples:
> nvidia,hssquelch-level = <2>;
> nvidia,hsdiscon-level = <5>;
> nvidia,xcvr-hsslew = <12>;
> + nvidia,pmc = <&tegra_pmc>;
> + nvidia,phy-instance= <2>;
> };
>
> - |
> @@ -346,6 +363,7 @@ examples:
> usb-phy@c5004000 {
> compatible = "nvidia,tegra20-usb-phy";
> reg = <0xc5004000 0x4000>;
> + interrupts = <0 21 4>;
> phy_type = "ulpi";
> clocks = <&tegra_car TEGRA20_CLK_USB2>,
> <&tegra_car TEGRA20_CLK_PLL_U>,
> @@ -354,4 +372,6 @@ examples:
> resets = <&tegra_car 58>, <&tegra_car 22>;
> reset-names = "usb", "utmi-pads";
> #phy-cells = <0>;
> + nvidia,pmc = <&tegra_pmc>;
> + nvidia,phy-instance= <1>;
> };
> --
> 2.32.0
>
>
