Memory access must be blocked before hardware reset is asserted and before
power is gated, otherwise a serious hardware fault is inevitable. Add
reset for memory clients to the GR2D, GR3D and Host1x nodes.
Tested-by: Peter Geis <pgwipeout@xxxxxxxxx> # Ouya T30
Tested-by: Matt Merhar <mattmerhar@xxxxxxxxxxxxxx> # Ouya T30
Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
arch/arm/boot/dts/tegra30.dtsi | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 6e760faaff29..9a9292e31e9f 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -122,8 +122,8 @@ host1x@50000000 {
interrupt-names = "syncpt", "host1x";
clocks = <&tegra_car TEGRA30_CLK_HOST1X>;
clock-names = "host1x";
- resets = <&tegra_car 28>;
- reset-names = "host1x";
+ resets = <&tegra_car 28>, <&mc TEGRA30_MC_RESET_HC>;
+ reset-names = "host1x", "mc";
iommus = <&mc TEGRA_SWGROUP_HC>;
operating-points-v2 = <&host1x_dvfs_opp_table>;
power-domains = <&pd_heg>;
@@ -186,8 +186,8 @@ gr2d@54140000 {
reg = <0x54140000 0x00040000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_GR2D>;
- resets = <&tegra_car 21>;
- reset-names = "2d";
+ resets = <&tegra_car 21>, <&mc TEGRA30_MC_RESET_2D>;
+ reset-names = "2d", "mc";
operating-points-v2 = <&gr2d_dvfs_opp_table>;
power-domains = <&pd_heg>;
@@ -201,8 +201,10 @@ gr3d@54180000 {
<&tegra_car TEGRA30_CLK_GR3D2>;
clock-names = "3d", "3d2";
resets = <&tegra_car 24>,
- <&tegra_car 98>;
- reset-names = "3d", "3d2";
+ <&tegra_car 98>,
+ <&mc TEGRA30_MC_RESET_3D>,
+ <&mc TEGRA30_MC_RESET_3D2>;
+ reset-names = "3d", "3d2", "mc", "mc2";
operating-points-v2 = <&gr3d_dvfs_opp_table>;
power-domains = <&pd_3d0>, <&pd_3d1>;
power-domain-names = "3d0", "3d1";
--
2.30.2
