31.05.2021 12:36, Thierry Reding пишет:
> On Tue, May 11, 2021 at 12:10:04AM +0300, Dmitry Osipenko wrote:
>> Convert NVIDIA Tegra ACTMON binding to schema.
>>
>> Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
>> ---
>> .../arm/tegra/nvidia,tegra30-actmon.txt | 57 ---------
>> .../devfreq/nvidia,tegra30-actmon.yaml | 121 ++++++++++++++++++
>> 2 files changed, 121 insertions(+), 57 deletions(-)
>> delete mode 100644 Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt
>> create mode 100644 Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt
>> deleted file mode 100644
>> index 897eedfa2bc8..000000000000
>> --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt
>> +++ /dev/null
>> @@ -1,57 +0,0 @@
>> -NVIDIA Tegra Activity Monitor
>> -
>> -The activity monitor block collects statistics about the behaviour of other
>> -components in the system. This information can be used to derive the rate at
>> -which the external memory needs to be clocked in order to serve all requests
>> -from the monitored clients.
>> -
>> -Required properties:
>> -- compatible: should be "nvidia,tegra<chip>-actmon"
>> -- reg: offset and length of the register set for the device
>> -- interrupts: standard interrupt property
>> -- clocks: Must contain a phandle and clock specifier pair for each entry in
>> -clock-names. See ../../clock/clock-bindings.txt for details.
>> -- clock-names: Must include the following entries:
>> - - actmon
>> - - emc
>> -- resets: Must contain an entry for each entry in reset-names. See
>> -../../reset/reset.txt for details.
>> -- reset-names: Must include the following entries:
>> - - actmon
>> -- operating-points-v2: See ../bindings/opp/opp.txt for details.
>> -- interconnects: Should contain entries for memory clients sitting on
>> - MC->EMC memory interconnect path.
>> -- interconnect-names: Should include name of the interconnect path for each
>> - interconnect entry. Consult TRM documentation for
>> - information about available memory clients, see MEMORY
>> - CONTROLLER section.
>> -
>> -For each opp entry in 'operating-points-v2' table:
>> -- opp-supported-hw: bitfield indicating SoC speedo ID mask
>> -- opp-peak-kBps: peak bandwidth of the memory channel
>> -
>> -Example:
>> - dfs_opp_table: opp-table {
>> - compatible = "operating-points-v2";
>> -
>> - opp@12750000 {
>> - opp-hz = /bits/ 64 <12750000>;
>> - opp-supported-hw = <0x000F>;
>> - opp-peak-kBps = <51000>;
>> - };
>> - ...
>> - };
>> -
>> - actmon@6000c800 {
>> - compatible = "nvidia,tegra124-actmon";
>> - reg = <0x0 0x6000c800 0x0 0x400>;
>> - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
>> - clocks = <&tegra_car TEGRA124_CLK_ACTMON>,
>> - <&tegra_car TEGRA124_CLK_EMC>;
>> - clock-names = "actmon", "emc";
>> - resets = <&tegra_car 119>;
>> - reset-names = "actmon";
>> - operating-points-v2 = <&dfs_opp_table>;
>> - interconnects = <&mc TEGRA124_MC_MPCORER &emc>;
>> - interconnect-names = "cpu";
>> - };
>> diff --git a/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml b/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml
>> new file mode 100644
>> index 000000000000..2a940d5d7ab4
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml
>> @@ -0,0 +1,121 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/devfreq/nvidia,tegra30-actmon.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: NVIDIA Tegra30 Activity Monitor
>> +
>> +maintainers:
>> + - Dmitry Osipenko <digetx@xxxxxxxxx>
>> + - Jon Hunter <jonathanh@xxxxxxxxxx>
>> + - Thierry Reding <thierry.reding@xxxxxxxxx>
>> +
>> +description: |
>> + The activity monitor block collects statistics about the behaviour of other
>> + components in the system. This information can be used to derive the rate at
>> + which the external memory needs to be clocked in order to serve all requests
>> + from the monitored clients.
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - nvidia,tegra30-actmon
>> + - nvidia,tegra114-actmon
>> + - nvidia,tegra124-actmon
>> + - nvidia,tegra210-actmon
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + clocks:
>> + maxItems: 2
>> +
>> + clock-names:
>> + items:
>> + - const: actmon
>> + - const: emc
>> +
>> + resets:
>> + maxItems: 1
>> +
>> + reset-names:
>> + items:
>> + - const: actmon
>> +
>> + interrupts:
>> + maxItems: 1
>> +
>> + interconnects:
>> + minItems: 1
>> + maxItems: 12
>> +
>> + interconnect-names:
>> + minItems: 1
>> + maxItems: 12
>> + description:
>> + Should include name of the interconnect path for each interconnect
>> + entry. Consult TRM documentation for information about available
>> + memory clients, see ACTIVITY MONITOR section.
>
> This used to be "see MEMORY CONTROLLER section", so I looked at the TRM
> to see if this was perhaps a fix for an earlier typo, but looking at the
> TRM (v3) I can't find a section named "ACTIVITY MONITOR".
>
> Should this be changed back to "MEMORY CONTROLLER"?
The "ACTIVITY MONITOR" is documented only in the T124/210 TRMs, the h/w
modules supported by ACTMON are enumerated there. Both "ACTIVITY
MONITOR" and "MEMORY CONTROLLER" could be mentioned for completeness.
