Some NVIDIA Tegra devices use a CPU soft-reset method for the reboot and in this case we need to restore the coupled voltages to the state that is suitable for hardware during boot. Add new regulator_sync_voltage_rdev() helper which is needed by regulator drivers in order to sync voltage of a coupled regulators. Acked-by: Mark Brown <broonie@xxxxxxxxxx> Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx> --- drivers/regulator/core.c | 23 +++++++++++++++++++++++ include/linux/regulator/driver.h | 1 + 2 files changed, 24 insertions(+) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index f192bf19492e..ead0b6d2af45 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -4105,6 +4105,29 @@ int regulator_set_voltage_time_sel(struct regulator_dev *rdev, } EXPORT_SYMBOL_GPL(regulator_set_voltage_time_sel); +int regulator_sync_voltage_rdev(struct regulator_dev *rdev) +{ + int ret; + + regulator_lock(rdev); + + if (!rdev->desc->ops->set_voltage && + !rdev->desc->ops->set_voltage_sel) { + ret = -EINVAL; + goto out; + } + + /* balance only, if regulator is coupled */ + if (rdev->coupling_desc.n_coupled > 1) + ret = regulator_balance_voltage(rdev, PM_SUSPEND_ON); + else + ret = -EOPNOTSUPP; + +out: + regulator_unlock(rdev); + return ret; +} + /** * regulator_sync_voltage - re-apply last regulator output voltage * @regulator: regulator source diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 4ea520c248e9..35e5a611db81 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -540,6 +540,7 @@ int regulator_set_current_limit_regmap(struct regulator_dev *rdev, int regulator_get_current_limit_regmap(struct regulator_dev *rdev); void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data); int regulator_set_ramp_delay_regmap(struct regulator_dev *rdev, int ramp_delay); +int regulator_sync_voltage_rdev(struct regulator_dev *rdev); /* * Helper functions intended to be used by regulator drivers prior registering -- 2.30.2