Use edge-triggered interrupt and set delay to 100ms for microphone hook
detection. This doesn't fix any known problems, but there is a smaller
chance to miss insertion of the microphone now, which previously happened
rarely.
Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
arch/arm/boot/dts/tegra20-acer-a500-picasso.dts | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
index 2298fc034183..d7d97b7e4794 100644
--- a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
+++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
@@ -420,11 +420,14 @@ wm8903: audio-codec@1a {
reg = <0x1a>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_EDGE_BOTH>;
gpio-controller;
#gpio-cells = <2>;
+ micdet-cfg = <0>;
+ micdet-delay = <100>;
+
gpio-cfg = <
0x0000 /* MIC_LR_OUT# GPIO, output, low */
0x0000 /* FM2018-enable GPIO, output, low */
--
2.30.2
