[PATCH v4 7/7] dt-bindings: clock: tegra: Convert to schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Convert NVIDIA Tegra clock bindings to schema.

Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
 .../bindings/clock/nvidia,tegra-car.yaml      | 118 ++++++++++++++++++
 .../bindings/clock/nvidia,tegra114-car.txt    |  63 ----------
 .../bindings/clock/nvidia,tegra124-car.txt    | 107 ----------------
 .../bindings/clock/nvidia,tegra20-car.txt     |  63 ----------
 .../bindings/clock/nvidia,tegra210-car.txt    |  56 ---------
 .../bindings/clock/nvidia,tegra30-car.txt     |  63 ----------
 6 files changed, 118 insertions(+), 352 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra-car.yaml
 delete mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
 delete mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt
 delete mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
 delete mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt
 delete mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt

diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra-car.yaml
new file mode 100644
index 000000000000..4d8d38bb1af2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra-car.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nvidia,tegra-car.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Clock and Reset Controller
+
+maintainers:
+  - Jon Hunter <jonathanh@xxxxxxxxxx>
+  - Thierry Reding <thierry.reding@xxxxxxxxx>
+
+description: |
+  The Clock and Reset (CAR) is the HW module responsible for muxing and gating
+  Tegra's clocks, and setting their rates. It comprises CLKGEN and RSTGEN units.
+
+  CLKGEN provides the registers to program the PLLs. It controls most of
+  the clock source programming and most of the clock dividers.
+
+  CLKGEN input signals include the external clock for the reference frequency
+  (12 MHz, 26 MHz) and the external clock for the Real Time Clock (32.768 KHz).
+
+  Outputs from CLKGEN are inputs clock of the h/w blocks in the Tegra system.
+
+  RSTGEN provides the registers needed to control resetting of each block in
+  the Tegra system.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra20-car
+      - nvidia,tegra30-car
+      - nvidia,tegra114-car
+      - nvidia,tegra124-car
+      - nvidia,tegra210-car
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  nvidia,external-memory-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle of the external memory controller node
+
+patternProperties:
+  "^emc-timings-[0-9]+$":
+    type: object
+    properties:
+      nvidia,ram-code:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          value of the RAM_CODE field in the PMC_STRAPPING_OPT_A register that
+          this timing set is used for
+
+    patternProperties:
+      "^timing-[0-9]+$":
+        type: object
+        properties:
+          clock-frequency:
+            description:
+              external memory clock rate in Hz
+            minimum: 1000000
+            maximum: 1000000000
+
+          nvidia,parent-clock-frequency:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              rate of parent clock in Hz
+            minimum: 1000000
+            maximum: 1000000000
+
+          clocks:
+            items:
+              - description: parent clock of EMC
+
+          clock-names:
+            items:
+              - const: emc-parent
+
+        required:
+          - clock-frequency
+          - nvidia,parent-clock-frequency
+          - clocks
+          - clock-names
+
+        additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+
+    car: clock-controller@60006000 {
+        compatible = "nvidia,tegra20-car";
+        reg = <0x60006000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+    usb-controller@c5004000 {
+        compatible = "nvidia,tegra20-ehci", "usb-ehci";
+        reg = <0xc5004000 0x4000>;
+        clocks = <&car TEGRA20_CLK_USB2>;
+        resets = <&car TEGRA20_CLK_USB2>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
deleted file mode 100644
index 9acea9d93160..000000000000
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-NVIDIA Tegra114 Clock And Reset Controller
-
-This binding uses the common clock binding:
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
-for muxing and gating Tegra's clocks, and setting their rates.
-
-Required properties :
-- compatible : Should be "nvidia,tegra114-car"
-- reg : Should contain CAR registers location and length
-- clocks : Should contain phandle and clock specifiers for two clocks:
-  the 32 KHz "32k_in", and the board-specific oscillator "osc".
-- #clock-cells : Should be 1.
-  In clock consumers, this cell represents the clock ID exposed by the
-  CAR. The assignments may be found in header file
-  <dt-bindings/clock/tegra114-car.h>.
-- #reset-cells : Should be 1.
-  In clock consumers, this cell represents the bit number in the CAR's
-  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
-
-Example SoC include file:
-
-/ {
-	tegra_car: clock {
-		compatible = "nvidia,tegra114-car";
-		reg = <0x60006000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	usb@c5004000 {
-		clocks = <&tegra_car TEGRA114_CLK_USB2>;
-	};
-};
-
-Example board file:
-
-/ {
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		osc: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <12000000>;
-		};
-
-		clk_32k: clock@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	&tegra_car {
-		clocks = <&clk_32k> <&osc>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt
deleted file mode 100644
index 7f02fb4ca4ad..000000000000
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt
+++ /dev/null
@@ -1,107 +0,0 @@
-NVIDIA Tegra124 and Tegra132 Clock And Reset Controller
-
-This binding uses the common clock binding:
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
-for muxing and gating Tegra's clocks, and setting their rates.
-
-Required properties :
-- compatible : Should be "nvidia,tegra124-car" or "nvidia,tegra132-car"
-- reg : Should contain CAR registers location and length
-- clocks : Should contain phandle and clock specifiers for two clocks:
-  the 32 KHz "32k_in", and the board-specific oscillator "osc".
-- #clock-cells : Should be 1.
-  In clock consumers, this cell represents the clock ID exposed by the
-  CAR. The assignments may be found in the header files
-  <dt-bindings/clock/tegra124-car-common.h> (which covers IDs common
-  to Tegra124 and Tegra132) and <dt-bindings/clock/tegra124-car.h>
-  (for Tegra124-specific clocks).
-- #reset-cells : Should be 1.
-  In clock consumers, this cell represents the bit number in the CAR's
-  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
-- nvidia,external-memory-controller : phandle of the EMC driver.
-
-The node should contain a "emc-timings" subnode for each supported RAM type (see
-field RAM_CODE in register PMC_STRAPPING_OPT_A).
-
-Required properties for "emc-timings" nodes :
-- nvidia,ram-code : Should contain the value of RAM_CODE this timing set
-  is used for.
-
-Each "emc-timings" node should contain a "timing" subnode for every supported
-EMC clock rate.
-
-Required properties for "timing" nodes :
-- clock-frequency : Should contain the memory clock rate to which this timing
-relates.
-- nvidia,parent-clock-frequency : Should contain the rate at which the current
-parent of the EMC clock should be running at this timing.
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  - emc-parent : the clock that should be the parent of the EMC clock at this
-timing.
-
-Example SoC include file:
-
-/ {
-	tegra_car: clock@60006000 {
-		compatible = "nvidia,tegra124-car";
-		reg = <0x60006000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-		nvidia,external-memory-controller = <&emc>;
-	};
-
-	usb@c5004000 {
-		clocks = <&tegra_car TEGRA124_CLK_USB2>;
-	};
-};
-
-Example board file:
-
-/ {
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		osc: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <112400000>;
-		};
-
-		clk_32k: clock@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	&tegra_car {
-		clocks = <&clk_32k> <&osc>;
-	};
-
-	clock@60006000 {
-		emc-timings-3 {
-			nvidia,ram-code = <3>;
-
-			timing-12750000 {
-				clock-frequency = <12750000>;
-				nvidia,parent-clock-frequency = <408000000>;
-				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
-				clock-names = "emc-parent";
-			};
-			timing-20400000 {
-				clock-frequency = <20400000>;
-				nvidia,parent-clock-frequency = <408000000>;
-				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
-				clock-names = "emc-parent";
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
deleted file mode 100644
index 6c5901b503d0..000000000000
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-NVIDIA Tegra20 Clock And Reset Controller
-
-This binding uses the common clock binding:
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
-for muxing and gating Tegra's clocks, and setting their rates.
-
-Required properties :
-- compatible : Should be "nvidia,tegra20-car"
-- reg : Should contain CAR registers location and length
-- clocks : Should contain phandle and clock specifiers for two clocks:
-  the 32 KHz "32k_in", and the board-specific oscillator "osc".
-- #clock-cells : Should be 1.
-  In clock consumers, this cell represents the clock ID exposed by the
-  CAR. The assignments may be found in header file
-  <dt-bindings/clock/tegra20-car.h>.
-- #reset-cells : Should be 1.
-  In clock consumers, this cell represents the bit number in the CAR's
-  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
-
-Example SoC include file:
-
-/ {
-	tegra_car: clock {
-		compatible = "nvidia,tegra20-car";
-		reg = <0x60006000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	usb@c5004000 {
-		clocks = <&tegra_car TEGRA20_CLK_USB2>;
-	};
-};
-
-Example board file:
-
-/ {
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		osc: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <12000000>;
-		};
-
-		clk_32k: clock@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	&tegra_car {
-		clocks = <&clk_32k> <&osc>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt
deleted file mode 100644
index 26f237f641b7..000000000000
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-NVIDIA Tegra210 Clock And Reset Controller
-
-This binding uses the common clock binding:
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
-for muxing and gating Tegra's clocks, and setting their rates.
-
-Required properties :
-- compatible : Should be "nvidia,tegra210-car"
-- reg : Should contain CAR registers location and length
-- clocks : Should contain phandle and clock specifiers for two clocks:
-  the 32 KHz "32k_in".
-- #clock-cells : Should be 1.
-  In clock consumers, this cell represents the clock ID exposed by the
-  CAR. The assignments may be found in header file
-  <dt-bindings/clock/tegra210-car.h>.
-- #reset-cells : Should be 1.
-  In clock consumers, this cell represents the bit number in the CAR's
-  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
-
-Example SoC include file:
-
-/ {
-	tegra_car: clock {
-		compatible = "nvidia,tegra210-car";
-		reg = <0x60006000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	usb@c5004000 {
-		clocks = <&tegra_car TEGRA210_CLK_USB2>;
-	};
-};
-
-Example board file:
-
-/ {
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk_32k: clock@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	&tegra_car {
-		clocks = <&clk_32k>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
deleted file mode 100644
index 63618cde12df..000000000000
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-NVIDIA Tegra30 Clock And Reset Controller
-
-This binding uses the common clock binding:
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
-for muxing and gating Tegra's clocks, and setting their rates.
-
-Required properties :
-- compatible : Should be "nvidia,tegra30-car"
-- reg : Should contain CAR registers location and length
-- clocks : Should contain phandle and clock specifiers for two clocks:
-  the 32 KHz "32k_in", and the board-specific oscillator "osc".
-- #clock-cells : Should be 1.
-  In clock consumers, this cell represents the clock ID exposed by the
-  CAR. The assignments may be found in header file
-  <dt-bindings/clock/tegra30-car.h>.
-- #reset-cells : Should be 1.
-  In clock consumers, this cell represents the bit number in the CAR's
-  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
-
-Example SoC include file:
-
-/ {
-	tegra_car: clock {
-		compatible = "nvidia,tegra30-car";
-		reg = <0x60006000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	usb@c5004000 {
-		clocks = <&tegra_car TEGRA30_CLK_USB2>;
-	};
-};
-
-Example board file:
-
-/ {
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		osc: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <12000000>;
-		};
-
-		clk_32k: clock@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	&tegra_car {
-		clocks = <&clk_32k> <&osc>;
-	};
-};
-- 
2.29.2




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux