Update following in rt5659.txt binding doc
- Add JD source for Intel HDA header: Commit 041e74b71491
("ASoC: rt5659: Add the support of Intel HDA Header")
added driver support. Add missing info here.
- sound-name-prefix: Used to prefix component widgets/kcontrols
with given prefix.
- ports: Helps to use the Codec with audio graph card
Signed-off-by: Sameer Pujar <spujar@xxxxxxxxxx>
Reported-by: Jon Hunter <jonathanh@xxxxxxxxxx>
Cc: Oder Chiou <oder_chiou@xxxxxxxxxxx>
Cc: Bard Liao <bardliao@xxxxxxxxxxx>
---
Documentation/devicetree/bindings/sound/rt5659.txt | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/rt5659.txt b/Documentation/devicetree/bindings/sound/rt5659.txt
index 56788f5..c473df5 100644
--- a/Documentation/devicetree/bindings/sound/rt5659.txt
+++ b/Documentation/devicetree/bindings/sound/rt5659.txt
@@ -37,10 +37,21 @@ Optional properties:
- realtek,jd-src
0: No JD is used
1: using JD3 as JD source
+ 2: JD source for Intel HDA header
- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
- realtek,reset-gpios : The GPIO that controls the CODEC's RESET pin.
+- sound-name-prefix: Please refer to name-prefix.txt
+
+- ports: A Codec may have a single or multiple I2S interfaces. These
+ interfaces on Codec side can be described under 'ports' or 'port'.
+ When the SoC or host device is connected to multiple interfaces of
+ the Codec, the connectivity can be described using 'ports' property.
+ If a single interface is used, then 'port' can be used. The usage
+ depends on the platform or board design.
+ Please refer to Documentation/devicetree/bindings/graph.txt
+
Pins on the device (for linking into audio routes) for RT5659/RT5658:
* DMIC L1
--
2.7.4
