Make regulator_sync_voltage() to re-balance voltage state of a coupled
regulators instead of changing the voltage directly.
Tested-by: Peter Geis <pgwipeout@xxxxxxxxx> # Ouya T30
Tested-by: Dmitry Osipenko <digetx@xxxxxxxxx> # A500 T20 and Nexus7 T30
Tested-by: Nicolas Chauvet <kwizart@xxxxxxxxx> # PAZ00 T20
Tested-by: Matt Merhar <mattmerhar@xxxxxxxxxxxxxx> # Ouya T30
Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
Changelog:
v4: - Now not using goto in the code, like it was suggested by Mark Brown
in a review comment to v3.
v3: - This patch is factored out from [1] to ease merging of the patches
that will use the regulator_sync_voltage(). The goal is to get this
change merged into 5.12, it will remove dependency for the Tegra Core
power domain driver which will target 5.13.
[1] https://patchwork.ozlabs.org/project/linux-tegra/list/?series=221130
drivers/regulator/core.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 3ae5ccd9277d..8e197b785a31 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -4148,7 +4148,11 @@ int regulator_sync_voltage(struct regulator *regulator)
if (ret < 0)
goto out;
- ret = _regulator_do_set_voltage(rdev, min_uV, max_uV);
+ /* balance only, if regulator is coupled */
+ if (rdev->coupling_desc.n_coupled > 1)
+ ret = regulator_balance_voltage(rdev, PM_SUSPEND_ON);
+ else
+ ret = _regulator_do_set_voltage(rdev, min_uV, max_uV);
out:
regulator_unlock(rdev);
--
2.29.2
