Re: [PATCH v2 6/8] usb: chipidea: tegra: Support runtime PM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Dec 17, 2020 at 12:40:05PM +0300, Dmitry Osipenko wrote:
> Tegra PHY driver now supports waking up controller from a low power mode.
> Enable runtime PM in order to put controller into the LPM during idle.
> 
> Tested-by: Matt Merhar <mattmerhar@xxxxxxxxxxxxxx>
> Tested-by: Nicolas Chauvet <kwizart@xxxxxxxxx>
> Tested-by: Peter Geis <pgwipeout@xxxxxxxxx>
> Tested-by: Ion Agorria <ion@xxxxxxxxxxx>
> Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
> ---
>  drivers/usb/chipidea/ci_hdrc_tegra.c | 13 ++++++++++---
>  1 file changed, 10 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/usb/chipidea/ci_hdrc_tegra.c b/drivers/usb/chipidea/ci_hdrc_tegra.c
> index 5fccdeeefc64..655671159511 100644
> --- a/drivers/usb/chipidea/ci_hdrc_tegra.c
> +++ b/drivers/usb/chipidea/ci_hdrc_tegra.c
> @@ -38,21 +38,24 @@ struct tegra_usb_soc_info {
>  
>  static const struct tegra_usb_soc_info tegra20_ehci_soc_info = {
>  	.flags = CI_HDRC_REQUIRES_ALIGNED_DMA |
> -		 CI_HDRC_OVERRIDE_PHY_CONTROL,
> +		 CI_HDRC_OVERRIDE_PHY_CONTROL |
> +		 CI_HDRC_SUPPORTS_RUNTIME_PM,
>  	.dr_mode = USB_DR_MODE_HOST,
>  	.txfifothresh = 10,
>  };
>  
>  static const struct tegra_usb_soc_info tegra30_ehci_soc_info = {
>  	.flags = CI_HDRC_REQUIRES_ALIGNED_DMA |
> -		 CI_HDRC_OVERRIDE_PHY_CONTROL,
> +		 CI_HDRC_OVERRIDE_PHY_CONTROL |
> +		 CI_HDRC_SUPPORTS_RUNTIME_PM,
>  	.dr_mode = USB_DR_MODE_HOST,
>  	.txfifothresh = 16,
>  };
>  
>  static const struct tegra_usb_soc_info tegra_udc_soc_info = {
>  	.flags = CI_HDRC_REQUIRES_ALIGNED_DMA |
> -		 CI_HDRC_OVERRIDE_PHY_CONTROL,
> +		 CI_HDRC_OVERRIDE_PHY_CONTROL |
> +		 CI_HDRC_SUPPORTS_RUNTIME_PM,
>  	.dr_mode = USB_DR_MODE_UNKNOWN,
>  };
>  
> @@ -323,6 +326,10 @@ static int tegra_usb_probe(struct platform_device *pdev)
>  	usb->data.hub_control = tegra_ehci_hub_control;
>  	usb->data.notify_event = tegra_usb_notify_event;
>  
> +	/* Tegra PHY driver currently doesn't support LPM for ULPI */
> +	if (of_usb_get_phy_mode(pdev->dev.of_node) == USBPHY_INTERFACE_MODE_ULPI)
> +		usb->data.flags &= ~CI_HDRC_SUPPORTS_RUNTIME_PM;
> +

Does this prevent the wakeup_enabled from being set for ULPI PHYs?

Thierry

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux