On Fri, 11 Dec 2020 09:01:19 -0800, Sowjanya Komatineni wrote: > This patch adds YAML based device tree binding document for Tegra > QSPI driver. > > Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx> > --- > .../bindings/spi/nvidia,tegra210-quad.yaml | 128 +++++++++++++++++++++ > 1 file changed, 128 insertions(+) > create mode 100644 Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: ./Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml: $id: relative path/filename doesn't match actual path or filename expected: http://devicetree.org/schemas/spi/nvidia,tegra210-quad.yaml# Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.example.dts:35.25-35: Warning (reg_format): /example-0/spi@70410000/flash@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.example.dts:23.22-40.11: Warning (spi_bus_bridge): /example-0/spi@70410000: incorrect #address-cells for SPI bus Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.example.dts:23.22-40.11: Warning (spi_bus_bridge): /example-0/spi@70410000: incorrect #size-cells for SPI bus Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge' Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.example.dts:33.25-39.19: Warning (avoid_default_addr_size): /example-0/spi@70410000/flash@0: Relying on default #address-cells value Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.example.dts:33.25-39.19: Warning (avoid_default_addr_size): /example-0/spi@70410000/flash@0: Relying on default #size-cells value Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.example.dt.yaml: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size' See https://patchwork.ozlabs.org/patch/1415099 The base for the patch is generally the last rc1. Any dependencies should be noted. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
