09.10.2020 02:00, Sebastian Reichel пишет: > Hi, > > On Sun, Sep 06, 2020 at 10:50:59PM +0300, Dmitry Osipenko wrote: >> Add binding document for the ENE KB930 Embedded Controller. >> >> Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx> >> --- >> .../devicetree/bindings/mfd/ene-kb930.yaml | 66 +++++++++++++++++++ >> 1 file changed, 66 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/mfd/ene-kb930.yaml >> >> diff --git a/Documentation/devicetree/bindings/mfd/ene-kb930.yaml b/Documentation/devicetree/bindings/mfd/ene-kb930.yaml >> new file mode 100644 >> index 000000000000..635c8966ca22 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/mfd/ene-kb930.yaml >> @@ -0,0 +1,66 @@ >> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/mfd/ene-kb930.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: ENE KB930 Embedded Controller bindings >> + >> +description: | >> + This binding describes the ENE KB930 Embedded Controller attached to an >> + I2C bus. >> + >> +maintainers: >> + - Dmitry Osipenko <digetx@xxxxxxxxx> >> + >> +properties: >> + compatible: >> + items: >> + - enum: >> + - acer,a500-iconia-ec # Acer A500 Iconia tablet device >> + - enum: >> + - ene,kb930 >> + reg: >> + maxItems: 1 >> + >> + monitored-battery: true > > ^^^ this is not being used by your battery driver. Do you plan > to use it in the future or is it a copy&paste mistake? :) Hello, this is correct that driver doesn't use monitored-battery info, but I was thinking that it's good to have anyways in the device-tree because this completes hardware description + the gauge driver isn't aware about maximal battery temperature. Hence it may become useful and it doesn't hurt to have that additional information about battery cell.
