When using tegra_soctherm driver on jetson-tk1, the following messages can be seen: from kernel: tegra_soctherm 700e2000.thermal-sensor: throttle-cfg: heavy: no throt prop or invalid prop soctherm: trip temperature -2147483647 forced to -127000 thermtrip: will shut down when cpu reaches 101000 mC soctherm: trip temperature -2147483647 forced to -127000 thermtrip: will shut down when gpu reaches 101000 mC soctherm: trip temperature -2147483647 forced to -127000 thermtrip: will shut down when pll reaches 103000 mC throttrip: pll: missing hot temperature soctherm: trip temperature -2147483647 forced to -127000 thermtrip: will shut down when mem reaches 101000 mC throttrip: mem: missing hot temperature IRQ index 1 not found This serie fixes two errors and two warnings that are reported in dmesg It was compiled and tested at runtime on jetson-tk1 only. v2: * Add missing tegra210 device-tree properties * Add the appropriate prefix for tegra soctherm * Use SoCs condition over of_compatible Nicolas Chauvet (6): ARM: tegra: Add missing gpu-throt-level to tegra124 soctherm ARM: tegra: Add missing hot temperatures to tegra124 thermal-zones arm64: tegra: Add missing hot temperatures to tegra132 thermal-zones arm64: tegra: Add missing gpu-throt-level to tegra210 soctherm arm64: tegra: Add missing hot temperatures to tegra210 thermal-zones thermal: tegra: Avoid setting edp_irq when not relevant arch/arm/boot/dts/tegra124.dtsi | 11 +++++++ arch/arm64/boot/dts/nvidia/tegra132.dtsi | 10 ++++++ arch/arm64/boot/dts/nvidia/tegra210.dtsi | 13 ++++++++ drivers/thermal/tegra/soctherm.c | 38 +++++++++++++---------- drivers/thermal/tegra/soctherm.h | 1 + drivers/thermal/tegra/tegra124-soctherm.c | 1 + drivers/thermal/tegra/tegra132-soctherm.c | 1 + drivers/thermal/tegra/tegra210-soctherm.c | 1 + 8 files changed, 60 insertions(+), 16 deletions(-) -- 2.25.4
