Re: [PATCH v2 1/4] dt-bindings: reserved-memory: Document "active" property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2020-09-24 17:23, Dmitry Osipenko wrote:
24.09.2020 17:01, Thierry Reding пишет:
On Thu, Sep 24, 2020 at 04:23:59PM +0300, Dmitry Osipenko wrote:
04.09.2020 15:59, Thierry Reding пишет:
From: Thierry Reding <treding@xxxxxxxxxx>

Reserved memory regions can be marked as "active" if hardware is
expected to access the regions during boot and before the operating
system can take control. One example where this is useful is for the
operating system to infer whether the region needs to be identity-
mapped through an IOMMU.

Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
  .../bindings/reserved-memory/reserved-memory.txt           | 7 +++++++
  1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
index 4dd20de6977f..163d2927e4fc 100644
--- a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+++ b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
@@ -63,6 +63,13 @@ reusable (optional) - empty property
        able to reclaim it back. Typically that means that the operating
        system can use that region to store volatile or cached data that
        can be otherwise regenerated or migrated elsewhere.
+active (optional) - empty property
+    - If this property is set for a reserved memory region, it indicates
+      that some piece of hardware may be actively accessing this region.
+      Should the operating system want to enable IOMMU protection for a
+      device, all active memory regions must have been identity-mapped
+      in order to ensure that non-quiescent hardware during boot can
+      continue to access the memory.
Linux implementation note:
  - If a "linux,cma-default" property is present, then Linux will use the


Hi,

Could you please explain what devices need this quirk? I see that you're
targeting Tegra SMMU driver, which means that it should be some pre-T186
device.

Primarily I'm looking at Tegra210 and later, because on earlier devices
the bootloader doesn't consistently initialize display. I know that it
does on some devices, but not all of them.

AFAIK, all tablet devices starting with Tegra20 that have display panel
are initializing display at a boot time for showing splash screen. This
includes all T20/T30/T114 tablets that are already supported by upstream
kernel.

This same code should also
work on Tegra186 and later (with an ARM SMMU) although the situation is
slightly more complicated there because IOMMU translations will fault by
default long before these identity mappings can be established.

Is this reservation needed for some device that has display
hardwired to a very specific IOMMU domain at the boot time?

No, this is only used to convey information about the active framebuffer
to the kernel. In practice the DMA/IOMMU code will use this information
to establish a 1:1 mapping on whatever IOMMU domain that was picked for
display.

If you're targeting devices that don't have IOMMU enabled by default at
the boot time, then this approach won't work for the existing devices
which won't ever get an updated bootloader.

If the devices don't use an IOMMU, then there should be no problem. The
extra reserved-memory nodes would still be necessary to ensure that the
kernel doesn't reuse the framebuffer memory for the slab allocator, but
if no IOMMU is used, then the display controller accessing the memory
isn't going to cause problems other than perhaps scanning out data that
is no longer a framebuffer.

There should also be no problem for devices with an old bootloader
because this code is triggered by the presence of a reserved-memory node
referenced via the memory-region property. Devices with an old
bootloader should continue to work as they did before. Although I
suppose they would start faulting once we enable DMA/IOMMU integration
for Tegra SMMU if they have a bootloader that does initialize display to
actively scan out during boot.

I think Robin Murphy already suggested that we should simply create
a dummy "identity" IOMMU domain by default for the DRM/VDE devices and
then replace it with an explicitly created domain within the drivers.

I don't recall reading about that suggestion. So does this mean that for
certain devices we'd want to basically passthrough by default and then
at some point during boot take over with a properly managed IOMMU
domain?

Yes, my understanding that this is what Robin suggested here:

https://lore.kernel.org/linux-iommu/cb12808b-7316-19db-7413-b7f852a6f8ae@xxxxxxx/

Just to clarify, what I was talking about there is largely orthogonal to the issue here. That was about systems with limited translation resources letting translation be specifically opt-in by IOMMU-aware drivers. It probably *would* happen to obviate the issue of disrupting live DMA at boot time on these particular Tegra platforms, but we still need something like Thierry's solution in general, since IOMMU drivers may have no other way to determine whether devices are active at boot and they have to take care to avoid breaking anything - e.g. SMMUv3 will at a bare minimum need to set up *some* form of valid stream table entry for the relevant device(s) right at the beginning where we first probe and reset the SMMU itself, regardless of what happens with domains and addresses later down the line.

The primary goal here is to move towards using the DMA API rather than
the IOMMU API directly, so we don't really have the option of replacing
with an explicitly created domain. Unless we have code in the DMA/IOMMU
code that does this somehow.

But I'm not sure what would be a good way to mark certain devices as
needing an identity domain by default. Do we still use the reserved-
memory node for that?

The reserved-memory indeed shouldn't be needed for resolving the
implicit IOMMU problem since we could mark certain devices within the
kernel IOMMU driver.

I haven't got around to trying to implement the implicit IOMMU support
yet, but I suppose we could implement the def_domain_type() hook in the
SMMU driver and then return IOMMU_DOMAIN_IDENTITY for the Display/VDE
devices. Then the Display/VDE drivers will take over the identity domain
and replace it with the explicit domain.

FWIW I've already cooked up identity domain support for tegra-gart; I was planning on tackling it for tegra-smmu as well for the next version of my arm default domains series (which will be after the next -rc1 now since I'm just about to take some long-overdue holiday).

That would still require some sort of flag to
specify which reserved-memory regions would need this identity mapping
because, as was pointed out in earlier review, some devices may have
reserved-memory regions that are not meant to be identity mapped.

Please note that the reserved-memory approach also creates problem for
selection of a large CMA region if FB is located somewhere in a middle
of DRAM.

I already see that the FB's reserved-memory will break CMA for Nexus 7
and Acer A500 because CMA area overlaps with the bootloader's FB :)

Also keep in mind that initrd needs a location too and location usually
hardwired in a bootloader. Hence it increases pressure on the CMA selection.

Secondly, all NVIDIA bootloaders are passing tegra_fbmem=... via
kernel's cmdline with the physical location of the framebuffer in
memory. Maybe we could support this option?

I'm not a big fan of that command-line option, but I also realize that
for older bootloaders that's probably the only option we have. I don't
suppose all of the devices support U-Boot?

Majority of devices in a wild don't use u-boot and they have a
locked-down bootloader. Still it's possible to chain-load u-boot or
bypass the "security" and replace the bootloader, but these approaches
aren't widely supported because they take a lot of effort to be
implemented and maintained.

Even those devices that use proper u-boot usually never updating it and
are running some ancient version. You can't ignore all those people :)

Because ideally we'd just
translate from tegra_fbmem=... to reserved-memory region there so that
we don't have to carry backwards-compatibility code for these purely
downstream bootloaders.

IIRC, in the past Robin Murphy was suggesting to read out hardware state
early during kernel boot in order to find what regions are in use by
hardware.

I doubt I suggested that in general, because I've always firmly believed it to be a terrible idea. I've debugged too many cases where firmware or kexec has inadvertently left DMA running and corrupted kernel memory, so in general we definitely *don't* want to blindly trust random hardware state. Anything I may have said in relation to Qualcomm's fundamentally broken hypervisor/bootloader setup should not be considered outside that specific context ;)

Robin.

I think it should be easy to do for the display controller since we
could check clock and PD states in order to decide whether DC's IO could
be accessed and then read out the FB pointer and size. I guess it should
take about hundred lines of code.

But the easiest way should be to ignore this trouble for devices that
have IOMMU disabled by default and simply allow display to show garbage.
Nobody ever complained about this for the past 7+ years :)

Hence implementing the dummy-identity domain support should be enough
for solving the problem, at least this should work for pre-T186 devices.




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux