[PATCH v6 26/35] i2c: tegra: Factor out packet header setup from tegra_i2c_xfer_msg()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The code related to packet header setting up is a bit messy and makes
tegra_i2c_xfer_msg() more difficult to read than it could be. Let's
factor the packet header setup from tegra_i2c_xfer_msg() into separate
function in order to make code easier to read and follow.

Reviewed-by: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
 drivers/i2c/busses/i2c-tegra.c | 93 ++++++++++++++++++++--------------
 1 file changed, 54 insertions(+), 39 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index e53334bc3de3..7d54b8b3ed9a 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -1098,6 +1098,57 @@ static int tegra_i2c_issue_bus_clear(struct i2c_adapter *adap)
 	return -EAGAIN;
 }
 
+static void tegra_i2c_push_packet_header(struct tegra_i2c_dev *i2c_dev,
+					 struct i2c_msg *msg,
+					 enum msg_end_type end_state)
+{
+	u32 *dma_buf = i2c_dev->dma_buf;
+	u32 packet_header;
+
+	packet_header = FIELD_PREP(PACKET_HEADER0_HEADER_SIZE, 0) |
+			FIELD_PREP(PACKET_HEADER0_PROTOCOL,
+				   PACKET_HEADER0_PROTOCOL_I2C) |
+			FIELD_PREP(PACKET_HEADER0_CONT_ID, i2c_dev->cont_id) |
+			FIELD_PREP(PACKET_HEADER0_PACKET_ID, 1);
+
+	if (i2c_dev->is_curr_dma_xfer && !i2c_dev->msg_read)
+		*dma_buf++ = packet_header;
+	else
+		i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
+
+	packet_header = msg->len - 1;
+
+	if (i2c_dev->is_curr_dma_xfer && !i2c_dev->msg_read)
+		*dma_buf++ = packet_header;
+	else
+		i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
+
+	packet_header = I2C_HEADER_IE_ENABLE;
+
+	if (end_state == MSG_END_CONTINUE)
+		packet_header |= I2C_HEADER_CONTINUE_XFER;
+	else if (end_state == MSG_END_REPEAT_START)
+		packet_header |= I2C_HEADER_REPEAT_START;
+
+	if (msg->flags & I2C_M_TEN) {
+		packet_header |= msg->addr;
+		packet_header |= I2C_HEADER_10BIT_ADDR;
+	} else {
+		packet_header |= msg->addr << I2C_HEADER_SLAVE_ADDR_SHIFT;
+	}
+
+	if (msg->flags & I2C_M_IGNORE_NAK)
+		packet_header |= I2C_HEADER_CONT_ON_NAK;
+
+	if (msg->flags & I2C_M_RD)
+		packet_header |= I2C_HEADER_READ;
+
+	if (i2c_dev->is_curr_dma_xfer && !i2c_dev->msg_read)
+		*dma_buf++ = packet_header;
+	else
+		i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
+}
+
 static int tegra_i2c_error_recover(struct tegra_i2c_dev *i2c_dev,
 				   struct i2c_msg *msg)
 {
@@ -1129,9 +1180,8 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 			      enum msg_end_type end_state)
 {
 	unsigned long time_left, xfer_time = 100;
-	u32 packet_header, int_mask;
-	u32 *buffer = NULL;
 	size_t xfer_size;
+	u32 int_mask;
 	int err;
 
 	err = tegra_i2c_flush_fifos(i2c_dev);
@@ -1186,49 +1236,14 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 						i2c_dev->dma_phys,
 						xfer_size,
 						DMA_TO_DEVICE);
-			buffer = i2c_dev->dma_buf;
 		}
 	}
 
-	packet_header = FIELD_PREP(PACKET_HEADER0_HEADER_SIZE, 0) |
-			FIELD_PREP(PACKET_HEADER0_PROTOCOL,
-				   PACKET_HEADER0_PROTOCOL_I2C) |
-			FIELD_PREP(PACKET_HEADER0_CONT_ID, i2c_dev->cont_id) |
-			FIELD_PREP(PACKET_HEADER0_PACKET_ID, 1);
-	if (i2c_dev->is_curr_dma_xfer && !i2c_dev->msg_read)
-		*buffer++ = packet_header;
-	else
-		i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
-
-	packet_header = msg->len - 1;
-	if (i2c_dev->is_curr_dma_xfer && !i2c_dev->msg_read)
-		*buffer++ = packet_header;
-	else
-		i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
-
-	packet_header = I2C_HEADER_IE_ENABLE;
-	if (end_state == MSG_END_CONTINUE)
-		packet_header |= I2C_HEADER_CONTINUE_XFER;
-	else if (end_state == MSG_END_REPEAT_START)
-		packet_header |= I2C_HEADER_REPEAT_START;
-	if (msg->flags & I2C_M_TEN) {
-		packet_header |= msg->addr;
-		packet_header |= I2C_HEADER_10BIT_ADDR;
-	} else {
-		packet_header |= msg->addr << I2C_HEADER_SLAVE_ADDR_SHIFT;
-	}
-	if (msg->flags & I2C_M_IGNORE_NAK)
-		packet_header |= I2C_HEADER_CONT_ON_NAK;
-	if (msg->flags & I2C_M_RD)
-		packet_header |= I2C_HEADER_READ;
-	if (i2c_dev->is_curr_dma_xfer && !i2c_dev->msg_read)
-		*buffer++ = packet_header;
-	else
-		i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
+	tegra_i2c_push_packet_header(i2c_dev, msg, end_state);
 
 	if (!i2c_dev->msg_read) {
 		if (i2c_dev->is_curr_dma_xfer) {
-			memcpy(buffer, msg->buf, msg->len);
+			memcpy(i2c_dev->dma_buf, msg->buf, msg->len);
 			dma_sync_single_for_device(i2c_dev->dev,
 						   i2c_dev->dma_phys,
 						   xfer_size,
-- 
2.27.0




[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux