MMC core now supports binding to a specific ID, which is very handy for
embedded devices, like Acer A500, because MMC ID may change depending on
kernel version or configuration which affects MMC driver probe order.
Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
arch/arm/boot/dts/tegra20-acer-a500-picasso.dts | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
index ab3c378e5519..8a7a104b3717 100644
--- a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
+++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
@@ -20,6 +20,10 @@ aliases {
serial0 = &uartd; /* Docking station */
serial1 = &uartc; /* Bluetooth */
serial2 = &uartb; /* GPS */
+
+ mmc0 = &sdmmc4; /* eMMC */
+ mmc1 = &sdmmc3; /* MicroSD */
+ mmc2 = &sdmmc1; /* WiFi */
};
/*
@@ -738,7 +742,7 @@ brcm_wifi_pwrseq: wifi-pwrseq {
power-off-delay-us = <300>;
};
- mmc@c8000000 {
+ sdmmc1: mmc@c8000000 {
status = "okay";
#address-cells = <1>;
@@ -767,7 +771,7 @@ wifi@1 {
};
};
- mmc@c8000400 {
+ sdmmc3: mmc@c8000400 {
status = "okay";
bus-width = <4>;
cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
@@ -776,7 +780,7 @@ mmc@c8000400 {
vqmmc-supply = <&vdd_3v3_sys>;
};
- mmc@c8000600 {
+ sdmmc4: mmc@c8000600 {
status = "okay";
bus-width = <8>;
vmmc-supply = <&vcore_emmc>;
--
2.27.0
