It turns out uSD card detection on the Jetson AGX Xavier is not working and
I/Os are limited to 3.3 V. SDIO is supported but not enabled. Also, the
on-board eMMC module is using HS200 only.
Changes in v2:
- fix board name in commit messages
- rebase on for-next
Kind regards,
Tamas
Tamás Szűcs (4):
arm64: tegra: Enable signal voltage switching on Tegra194 SDMMC1 and
SDMMC3
arm64: tegra: Fix CD on Jetson AGX Xavier SDMMC1
arm64: tegra: Configure SDIO cards on Jetson AGX Xavier SDMMC1
arm64: tegra: Enable HS400 on Tegra194 SDMMC4
.../arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 4 +-
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 46 +++++++++++++++++++
2 files changed, 49 insertions(+), 1 deletion(-)
--
2.20.1
