02.07.2020 08:43, Dmitry Osipenko пишет:
> 02.07.2020 08:30, Chanwoo Choi пишет:
>> On 7/2/20 2:07 PM, Dmitry Osipenko wrote:
>>> 02.07.2020 07:18, Chanwoo Choi пишет:
>>>> Hi Dmitry,
>>>>
>>>> On 6/9/20 10:13 PM, Dmitry Osipenko wrote:
>>>>> The clk_round_rate() won't be usable for building OPP table once
>>>>> interconnect support will be added to the EMC driver because that CLK API
>>>>> function limits the rounded rate based on the clk rate that is imposed by
>>>>> active clk-users, and thus, the rounding won't work as expected if
>>>>> interconnect will set the minimum EMC clock rate before devfreq driver is
>>>>> loaded. The struct tegra_mc contains memory timings which could be used by
>>>>> the devfreq driver for building up OPP table instead of rounding clock
>>>>> rate, this patch implements this idea.
>>>>>
>>>>> Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
>>>>> ---
>>>>> drivers/devfreq/tegra20-devfreq.c | 18 +++++++++++-------
>>>>> 1 file changed, 11 insertions(+), 7 deletions(-)
>>>>>
>>>>> diff --git a/drivers/devfreq/tegra20-devfreq.c b/drivers/devfreq/tegra20-devfreq.c
>>>>> index 6469dc69c5e0..bf504ca4dea2 100644
>>>>> --- a/drivers/devfreq/tegra20-devfreq.c
>>>>> +++ b/drivers/devfreq/tegra20-devfreq.c
>>>>> @@ -123,8 +123,7 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
>>>>> {
>>>>> struct tegra_devfreq *tegra;
>>>>> struct tegra_mc *mc;
>>>>> - unsigned long max_rate;
>>>>> - unsigned long rate;
>>>>> + unsigned int i;
>>>>> int err;
>>>>>
>>>>> mc = tegra_get_memory_controller();
>>>>> @@ -151,12 +150,17 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
>>>>>
>>>>> tegra->regs = mc->regs;
>>>>>
>>>>> - max_rate = clk_round_rate(tegra->emc_clock, ULONG_MAX);
>>>>> -
>>>>> - for (rate = 0; rate <= max_rate; rate++) {
>>>>> - rate = clk_round_rate(tegra->emc_clock, rate);
>>>>> + if (!mc->num_timings) {
>>>>
>>>> Could you explain what is meaning of 'num_timing?
>>>
>>> The num_timings is the number of memory timings defined in a
>>> device-tree. One timing configuration per memory clock rate.
>>
>> OK. I understand.
>>
>>>
>>>> Also, why add the opp entry in case of mc->num_timings is zero?
>>>
>>> Timings may be not defined in some device-trees at all and in this case
>>> memory always running on a fixed clock rate.
>>
>> You mean that 'timings' information is optional?
>
> Yes
>
> Actually, looks like I missed to properly test this case where timings
> are missing in DT and it shouldn't work with the current code. I'll fix
> it in the next version.
>
>>>
>>> The devfreq driver won't be practically useful if mc->num_timings is
>>> zero since memory frequency can't be changed, but anyways we'd want to
>>> load the devfreq driver in order to prevent confusion about why it's not
>>> loaded.
>>>
>>> For example, you may ask somebody to show contents of
>>> /sys/class/devfreq/tegra20-devfreq/trans_stat and the person says to you
>>> that this file doesn't exist, now you'll have to figure out what
>>> happened to the devfreq driver.
>>
>> I understand why add OPP entry point when timing is not defined on DT.
>> But, actually, I think that you better to change 'timings' info is mandatory
>> instead of optional. Because the devfreq driver is for DVFS
>> and the driver supporting DVFS have to have the frequency information
>> like OPP.
That's what I initially did by bailing out from driver's probe if
timings info is missing, until ran into a situation described above :)
>> Or,
>> If you want to keep 'timing' is optional on DT,
>> I recommend that you add one timing data to tegra mc driver
>> when DT doesn't include the any timing information
>> I think that is it more clear.
>
> Okay, I'll move it into the MC driver in the next version.
>
> Thank you for the review!
>
