From: Thierry Reding <treding@xxxxxxxxxx>
Use the common gpios- prefix for GPIO hog node names to make it clear
that they are all hogs. This helps with json-schema based validation.
Cc: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
Cc: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>
Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
arch/arm/boot/dts/tegra124-apalis-eval.dts | 2 +-
arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts | 2 +-
arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi | 4 ++--
arch/arm/boot/dts/tegra124-apalis.dtsi | 4 ++--
arch/arm/boot/dts/tegra20-colibri.dtsi | 6 +++---
arch/arm/boot/dts/tegra30-apalis-eval.dts | 2 +-
arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts | 2 +-
arch/arm/boot/dts/tegra30-colibri.dtsi | 2 +-
8 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts
index 28c29b6813a7..89fafa39aa2a 100644
--- a/arch/arm/boot/dts/tegra124-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts
@@ -246,7 +246,7 @@ reg_usbh_vbus: regulator-usbh-vbus {
&gpio {
/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
- pex-perst-n {
+ gpios-pex-perst-n {
gpio-hog;
gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
index f3afde410615..441a244ef6c1 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
@@ -248,7 +248,7 @@ reg_usbh_vbus: regulator-usbh-vbus {
&gpio {
/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
- pex-perst-n {
+ gpios-pex-perst-n {
gpio-hog;
gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
index 0d6890af457e..eb5f4ad0fe71 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
@@ -2048,7 +2048,7 @@ gpu-shutdown-trip {
&gpio {
/* I210 Gigabit Ethernet Controller Reset */
- lan-reset-n {
+ gpios-lan-reset-n {
gpio-hog;
gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
output-high;
@@ -2056,7 +2056,7 @@ lan-reset-n {
};
/* Control MXM3 pin 26 Reset Module Output Carrier Input */
- reset-moci-ctrl {
+ gpios-reset-moci-ctrl {
gpio-hog;
gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index 8857a11332c2..64a18b525378 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -2040,7 +2040,7 @@ gpu-shutdown-trip {
&gpio {
/* I210 Gigabit Ethernet Controller Reset */
- lan-reset-n {
+ gpios-lan-reset-n {
gpio-hog;
gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
output-high;
@@ -2048,7 +2048,7 @@ lan-reset-n {
};
/* Control MXM3 pin 26 Reset Module Output Carrier Input */
- reset-moci-ctrl {
+ gpios-reset-moci-ctrl {
gpio-hog;
gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm/boot/dts/tegra20-colibri.dtsi b/arch/arm/boot/dts/tegra20-colibri.dtsi
index 6162d193e12c..90f317117298 100644
--- a/arch/arm/boot/dts/tegra20-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra20-colibri.dtsi
@@ -743,7 +743,7 @@ sound {
};
&gpio {
- lan-reset-n {
+ gpios-lan-reset-n {
gpio-hog;
gpios = <TEGRA_GPIO(V, 4) GPIO_ACTIVE_HIGH>;
output-high;
@@ -751,7 +751,7 @@ lan-reset-n {
};
/* Tri-stating GMI_WR_N on SODIMM pin 99 nPWE */
- npwe {
+ gpios-npwe {
gpio-hog;
gpios = <TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
output-high;
@@ -759,7 +759,7 @@ npwe {
};
/* Not tri-stating GMI_WR_N on SODIMM pin 93 RDnWR */
- rdnwr {
+ gpios-rdnwr {
gpio-hog;
gpios = <TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>;
output-low;
diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts
index 9f653ef41da4..01b2a9db77c8 100644
--- a/arch/arm/boot/dts/tegra30-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts
@@ -239,7 +239,7 @@ reg_usbh_vbus: regulator-usbh-vbus {
&gpio {
/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
- pex-perst-n {
+ gpios-pex-perst-n {
gpio-hog;
gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
index dc633e529822..d5a244351137 100644
--- a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
@@ -257,7 +257,7 @@ reg_vddio_sdmmc3: regulator-vddio-sdmmc3 {
&gpio {
/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
- pex-perst-n {
+ gpios-pex-perst-n {
gpio-hog;
gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 933087ee45a8..c209020e13fd 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -1043,7 +1043,7 @@ sound {
};
&gpio {
- lan-reset-n {
+ gpios-lan-reset-n {
gpio-hog;
gpios = <TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
output-high;
--
2.24.1
