Re: [PATCHv2 0/7] Support inhibiting input devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



W dniu 03.06.2020 o 19:38, Hans de Goede pisze:
Hi,

On 6/3/20 3:07 PM, Andrzej Pietrasiewicz wrote:
Hi Hans, hi Dmitry,

<snip>

I'm taking one step back and looking at the ->open() and ->close()
driver callbacks. They are called from input_open_device() and
input_close_device(), respectively:

input_open_device():
"This function should be called by input handlers when they
want to start receive events from given input device."

->open() callback:
"this method is called when the very first user calls
input_open_device(). The driver must prepare the device to start
generating events (start polling thread, request an IRQ, submit
URB, etc.)"

input_close_device():
"This function should be called by input handlers when they
want to stop receive events from given input device."

->close() callback:
"this method is called when the very last user calls
input_close_device()"

It seems to me that the callback names do not reflect their
purpose: their meaning is not to "open" or to "close" but to
give drivers a chance to control when they start or stop
providing events to the input core.

What would you say about changing the callbacks' names?
I'd envsion: ->provide_events() instead of ->open() and
->stop_events() instead of ->close(). Of course drivers can
exploit the fact of knowing that nobody wants any events
from them and do whatever they consider appropriate, for
example go into a low power mode - but the latter is beyond
the scope of the input subsystem and is driver-specific.

I don't have much of an opinion on changing the names,
to me open/close have always means start/stop receiving
events. This follows the everything is a file philosophy,
e.g. you can also not really "open" a serial port,
yet opening /dev/ttyS0 will activate the receive IRQ
of the UART, etc. So maybe we just need to make the
docs clearer rather then do the rename?  Doing the
rename is certainly going to cause a lot of churn.

Right, I can see now that the suggestion to change names is
too far fetched. (I feel that release() would be better
than close(), though). But it exposes the message I wanted to
pass.


Anyways as said, I don't have much of an opinion,
so I'll leave commenting (more) on this to Dmitry.

With such a naming change in mind let's consider inhibiting.
We want to be able to control when to disregard events from
a given device. It makes sense to do it at device level, otherwise
such an operation would have to be invoked in all associated
handlers (those that have an open handle associating them with
the device in question). But of course we can do better than
merely ignoring the events received: we can tell the drivers
that we don't want any events from them, and later, at uninhibit
time, tell them to start providing the events again. Conceptually,
the two operations (provide or don't provide envents) are exactly
the same thing we want to be happening at input_open_device() and
input_close_device() time. To me, changing the names of
->open() and ->close() exposes this fact very well.

Consequently, ->inhibit() and ->uninhibit() won't be needed,
and drivers which already implement ->provide_events() (formerly
->open()) and ->stop_events() (formerly ->close()) will receive
full inhibit/uninhibit support for free (subject to how well they
implement ->provide_events()/->stop_events()). Unless we can come
up with what the drivers might be doing on top of ->stop_events()
and ->provide_events() when inhibiting/uninhibiting, but it seems
to me we can't. Can we?

Right. I'm happy that you've come to see that both on open/close
and on inhibit/uninhibit we want to "start receiving events" and
"stop receiving events", so that we only need one set of callbacks.


Yeah, that's my conclusion - at least on a conceptual level.

That said, what I can imagine is an existing driver (e.g. elan_i2c)
which does not implement neither open() nor close(), but does have
suspend() and resume(). Then it is maybe a bit easier to add inhibit()
and uninhibit() /they would be similar to suspend and resume/ instead
of open() and close(): If only open() and close() are possible, then
the probe function needs to be extended to "close" the device before it
gets registered, because from the moment it is registered it might be
opened right away. And the device must be available earlier during the
course of probe to query some parameters through i2c:

+static int elan_reactivate(struct elan_tp_data *data)
+{
+	struct device *dev = &data->client->dev;
+	int ret;
+
+	ret = elan_enable_power(data);
+	if (ret)
+		dev_err(dev, "failed to restore power: %d\n", ret);
+
+	ret = elan_initialize(data);
+	if (ret)
+		dev_err(dev, "failed to re-initialize touchpad: %d\n", ret);
+
+	return ret;
+}
+
+static int elan_open(struct input_dev *input)
+{
+	struct elan_tp_data *data = input_get_drvdata(input);
+	struct i2c_client *client = data->client;
+	int ret;
+
+	dev_dbg(&client->dev, "uninhibiting\n");
+
+	ret = mutex_lock_interruptible(&data->sysfs_mutex);
+	if (ret)
+		return ret;
+
+	ret = elan_reactivate(data);
+	if (ret == 0)
+		enable_irq(client->irq);
+
+	mutex_unlock(&data->sysfs_mutex);
+
+	return ret;
+}
+
+static int elan_inhibit(struct input_dev *input)
+{
+	struct elan_tp_data *data = input_get_drvdata(input);
+	struct i2c_client *client = data->client;
+	int ret;
+
+	dev_dbg(&client->dev, "closing\n");
+
+	/*
+	 * We are taking the mutex to make sure sysfs operations are
+	 * complete before we attempt to bring the device into low[er]
+	 * power mode.
+	 */
+	ret = mutex_lock_interruptible(&data->sysfs_mutex);
+	if (ret)
+		return ret;
+
+	disable_irq(client->irq);
+
+	ret = elan_disable_power(data);
+	if (ret)
+		enable_irq(client->irq);
+
+	mutex_unlock(&data->sysfs_mutex);
+
+	return ret;
+}
+
+static void elan_close(struct input_dev *input)
+{
+	elan_inhibit(input);
+}
+
 static int elan_query_device_info(struct elan_tp_data *data)
 {
 	int error;
 	u16 ic_type;

 	error = data->ops->get_version(data->client, false, &data->fw_version);
 	if (error)
 		return error;

 	error = data->ops->get_checksum(data->client, false,
 					&data->fw_checksum);
 	if (error)
 		return error;

 	error = data->ops->get_version(data->client, true, &data->iap_version);
 	if (error)
 		return error;
@@ -1071,34 +1141,36 @@ static int elan_setup_trackpoint_input_device(struct elan_tp_data *data)

 static int elan_setup_input_device(struct elan_tp_data *data)
 {
 	struct device *dev = &data->client->dev;
 	struct input_dev *input;
 	unsigned int max_width = max(data->width_x, data->width_y);
 	unsigned int min_width = min(data->width_x, data->width_y);
 	int error;

 	input = devm_input_allocate_device(dev);
 	if (!input)
 		return -ENOMEM;

 	input->name = "Elan Touchpad";
 	input->id.bustype = BUS_I2C;
 	input->id.vendor = ELAN_VENDOR_ID;
 	input->id.product = data->product_id;
+	input->open = elan_open;
+	input->close = elan_close;
 	input_set_drvdata(input, data);

 	error = input_mt_init_slots(input, ETP_MAX_FINGERS,
 				    INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED);
 	if (error) {
 		dev_err(dev, "failed to initialize MT slots: %d\n", error);
 		return error;
 	}

 	__set_bit(EV_ABS, input->evbit);
 	__set_bit(INPUT_PROP_POINTER, input->propbit);
 	if (data->clickpad) {
 		__set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
 	} else {
 		__set_bit(BTN_RIGHT, input->keybit);
 		if (data->middle_button)
 			__set_bit(BTN_MIDDLE, input->keybit);
@@ -1253,34 +1325,40 @@ static int elan_probe(struct i2c_client *client,
 	if (!irqflags)
 		irqflags = IRQF_TRIGGER_FALLING;

 	error = devm_request_threaded_irq(dev, client->irq, NULL, elan_isr,
 					  irqflags | IRQF_ONESHOT,
 					  client->name, data);
 	if (error) {
 		dev_err(dev, "cannot register irq=%d\n", client->irq);
 		return error;
 	}

 	error = devm_device_add_groups(dev, elan_sysfs_groups);
 	if (error) {
 		dev_err(dev, "failed to create sysfs attributes: %d\n", error);
 		return error;
 	}

+	error = elan_inhibit(data->input);
+	if (error) {
+		dev_err(dev, "failed to inhibit input device before registering: %d\n", error);
+		return error;
+	}
+
 	error = input_register_device(data->input);
 	if (error) {
 		dev_err(dev, "failed to register input device: %d\n", error);
 		return error;
 	}

 	if (data->tp_input) {
 		error = input_register_device(data->tp_input);
 		if (error) {
 			dev_err(&client->dev,
 				"failed to register TrackPoint input device: %d\n",
 				error);
 			return error;
 		}
 	}

 	/*
@@ -1294,72 +1372,71 @@ static int elan_probe(struct i2c_client *client,
 }

 static int __maybe_unused elan_suspend(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct elan_tp_data *data = i2c_get_clientdata(client);
 	int ret;

 	/*
 	 * We are taking the mutex to make sure sysfs operations are
 	 * complete before we attempt to bring the device into low[er]
 	 * power mode.
 	 */
 	ret = mutex_lock_interruptible(&data->sysfs_mutex);
 	if (ret)
 		return ret;

-	disable_irq(client->irq);
+	mutex_lock(&data->input->mutex);
+	if (input_device_enabled(data->input)) {
+		disable_irq(client->irq);

-	if (device_may_wakeup(dev)) {
-		ret = elan_sleep(data);
-		/* Enable wake from IRQ */
-		data->irq_wake = (enable_irq_wake(client->irq) == 0);
-	} else {
-		ret = elan_disable_power(data);
+		if (device_may_wakeup(dev)) {
+			ret = elan_sleep(data);
+			/* Enable wake from IRQ */
+			data->irq_wake = (enable_irq_wake(client->irq) == 0);
+		} else {
+			ret = elan_disable_power(data);
+		}
 	}
+	mutex_unlock(&data->input->mutex);

 	mutex_unlock(&data->sysfs_mutex);
 	return ret;
 }

 static int __maybe_unused elan_resume(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct elan_tp_data *data = i2c_get_clientdata(client);
-	int error;
+	int ret = 0;

-	if (device_may_wakeup(dev) && data->irq_wake) {
-		disable_irq_wake(client->irq);
-		data->irq_wake = false;
-	}
+	mutex_lock(&data->input->mutex);
+	if (input_device_enabled(data->input)) {
+		if (data->irq_wake) {
+			disable_irq_wake(client->irq);
+			data->irq_wake = false;
+		}

-	error = elan_enable_power(data);
-	if (error) {
-		dev_err(dev, "power up when resuming failed: %d\n", error);
-		goto err;
+		ret = elan_reactivate(data);
+		enable_irq(data->client->irq);
 	}
+	mutex_unlock(&data->input->mutex);

-	error = elan_initialize(data);
-	if (error)
-		dev_err(dev, "initialize when resuming failed: %d\n", error);
-
-err:
-	enable_irq(data->client->irq);
-	return error;
+	return ret;
 }

Regards,

Andrzej



[Index of Archives]     [ARM Kernel]     [Linux ARM]     [Linux ARM MSM]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux