On Thu, May 21, 2020 at 04:31:02PM -0700, Krishna Reddy wrote: > Changes in v5: > Rebased on top of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git next > > v4 - https://lkml.org/lkml/2019/10/30/1054 > v3 - https://lkml.org/lkml/2019/10/18/1601 > v2 - https://lkml.org/lkml/2019/9/2/980 > v1 - https://lkml.org/lkml/2019/8/29/1588 > > Krishna Reddy (5): > iommu/arm-smmu: add NVIDIA implementation for dual ARM MMU-500 usage > dt-bindings: arm-smmu: Add binding for Tegra194 SMMU > iommu/arm-smmu: Add global/context fault implementation hooks For the record: I don't think we should apply these because we don't have a good way of testing them. We currently have three problems that prevent us from enabling SMMU on Tegra194: 1) If we enable SMMU support, then the DMA API will automatically try to use SMMU domains for allocations. This means that translations will happen as soon as a device's IOMMU operations are initialized and that is typically a long time (in kernel time at least) before a driver is bound and has a chance of configuring the device. This causes problems for non-quiesced devices like display controllers that the bootloader might have set up to scan out a boot splash. What we're missing here is a way to: a) advertise reserved memory regions for boot splash framebuffers b) map reserved memory regions early during SMMU setup Patches have been floating on the public mailing lists for b) but a) requires changes to the bootloader (both proprietary ones and U-Boot for SoCs prior to Tegra194). 2) Even if we don't enable SMMU for a given device (by not hooking up the iommus property), with a default kernel configuration we get a bunch of faults during boot because the ARM SMMU driver faults by default (rather than bypass) for masters which aren't hooked up to the SMMU. We could work around that by changing the default configuration or overriding it on the command-line, but that's not really an option because it decreases security and means that Tegra194 won't work out-of-the-box. 3) We don't properly describe the DMA hierarchy, which causes the DMA masks to be improperly set. As a bit of background: Tegra194 has a special address bit (bit 39) that causes some swizzling to happen within the memory controller. As a result, any I/O virtual address that has bit 39 set will cause this swizzling to happen on access. The DMA/IOMMU allocator always starts allocating from the top of the IOVA space, which means that the first couple of gigabytes of allocations will cause most devices to fail because of the undesired swizzling that occurs. We had an initial patch for SDHCI merged that hard-codes the DMA mask to DMA_BIT_MASK(39) on Tegra194 to work around that. However, the devices all do support addressing 40 bits and the restriction on bit 39 is really a property of the bus rather than a capability of the device. This means that we would have to work around this for every device driver by adding similar hacks. A better option is to properly describe the DMA hierarchy (using dma-ranges) because that will then automatically be applied as a constraint on each device's DMA mask. I have been working on patches to address this, but they are fairly involved because they require device tree bindings changes and so on. So before we solve all of the above issues we can't really enable SMMU on Tegra194 and hence won't be able to test it. As such we don't know if these patches even work, nor can we validate that they continue to work. As such, I don't think there's any use in applying these patches upstream since they will be effectively dead code until all of the above issues are resolved. > arm64: tegra: Add DT node for T194 SMMU > arm64: tegra: enable SMMU for SDHCI and EQOS on T194 This one is going to cause EQOS to break because of 3) above. It might work for SDHCI because of the workaround we currently have in that driver. However, I do have a local patch that reverts the workaround and replaces it with the proper fix, which uses dma-ranges as mentioned above. That said, I have tested earlier versions of this patchset on top of my local branch with fixes for the above and they do seem to work as expected. So I'll leave it up to the IOMMU maintainers whether they're willing to merge the driver patches as is. But I want to clarify that I won't be applying the DTS patches until we've solved all of the above issues and therefore it should be clear that these won't be runtime tested until then. I expect it will take at least until v5.9-rc1 before we have all the changes merged that would allow us to enable SMMU support. Thierry > .../devicetree/bindings/iommu/arm,smmu.yaml | 5 + > MAINTAINERS | 2 + > arch/arm64/boot/dts/nvidia/tegra194.dtsi | 81 ++++++ > drivers/iommu/Makefile | 2 +- > drivers/iommu/arm-smmu-impl.c | 3 + > drivers/iommu/arm-smmu-nvidia.c | 261 ++++++++++++++++++ > drivers/iommu/arm-smmu.c | 11 +- > drivers/iommu/arm-smmu.h | 4 + > 8 files changed, 366 insertions(+), 3 deletions(-) > create mode 100644 drivers/iommu/arm-smmu-nvidia.c > > > base-commit: 365f8d504da50feaebf826d180113529c9383670 > -- > 2.26.2 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Attachment:
signature.asc
Description: PGP signature
